| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Carlisle Chrysler Nationals July 12-14 2019 https://www.slantsix.org/forum/viewtopic.php?f=10&t=63773 |
Page 1 of 1 |
| Author: | wvenable [ Sat Jun 29, 2019 12:04 pm ] |
| Post subject: | Carlisle Chrysler Nationals July 12-14 2019 |
Almost time for my working vacation. Hope to see some of you fellow slanters. Stop by the A&A booth and say hey! Rick and his son Nick are both kinda homely looking so I will be easy to spot - see ya there!!!! |
|
| Author: | Greg Ondayko [ Sat Jun 29, 2019 2:26 pm ] |
| Post subject: | Re: Carlisle Chrysler Nationals July 12-14 2019 |
Wayne, any slanter Discounts? I am looking to get a deep pan and gasket for the 727 on the ramcharger. See you there! Greg |
|
| Author: | wvenable [ Sat Jun 29, 2019 2:46 pm ] |
| Post subject: | Re: Carlisle Chrysler Nationals July 12-14 2019 |
See what I can do! |
|
| Author: | Rick Covalt [ Sat Jun 29, 2019 4:08 pm ] |
| Post subject: | Re: Carlisle Chrysler Nationals July 12-14 2019 |
Greg I have a 727 gasket that you can have also. Remind me next time you are coming to race and I'll bring it along. Or I can bring it to Carlisle for you. Wayne, has Rick ever put a "kit" together for a rebuild on a Slant 904. We don't have 5 or 600 HP, so our needs are a little different than an all out small block. A list of what we need for a 250 or 300 HP engine would be helpful for a dummy like me. Thanks !!! |
|
| Author: | Greg Ondayko [ Sat Jun 29, 2019 7:53 pm ] |
| Post subject: | Re: Carlisle Chrysler Nationals July 12-14 2019 |
Get the internals as light as possible and reduce the static rolling resistance of the bushings be going to torringinton bearings where you can.Rick has all of the goodies for doing that! You make more hp by not spinning all that heavy stock stuff in the trans. Greg |
|
| Author: | wvenable [ Sun Jun 30, 2019 6:43 am ] |
| Post subject: | Re: Carlisle Chrysler Nationals July 12-14 2019 |
Rick, don't know of a kit....He (being the other Rick) normally works with customers to help them with their goals based on their budget. If you need any pieces/ parts let me know or call Rick about your plans. He does give show discounts but not on all items. That being said I have worked for discounts for forum members. You probably still have my number give me a call and i will see what I can do. We normally leave several days early to get there and set up so this week would be the time to coordinate things if you need/want something and want to save freight and possibly get a show discount. Hope to see you there! |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|