| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Holley 1945 problem? '83 Dodge Ram D150 pickup https://www.slantsix.org/forum/viewtopic.php?f=19&t=43609 |
Page 2 of 2 |
| Author: | kimcadmus [ Wed May 25, 2011 3:21 pm ] |
| Post subject: | |
Ok, I have the new accelerator pump in and the charcoal out of the carb and I am about to install it. I have two lines running from the canister to the carb. I will leave off the "bowl vent" line but what about the one that runs to the bottom of the bowl on the opposite (passenger) side? |
|
| Author: | Wizard [ Wed May 25, 2011 4:11 pm ] |
| Post subject: | |
Best fix is install a filter in line with the vent hose to prevent charcoal from getting into your carb. Cheers, Wizard |
|
| Author: | SlantSixDan [ Thu May 26, 2011 6:17 am ] |
| Post subject: | |
Wizard wrote: Best fix is install a filter in line with the vent hose to prevent charcoal from getting into your carb
That's not a fix, it's a band-aid. |
|
| Author: | SlantSixDan [ Thu May 26, 2011 6:18 am ] |
| Post subject: | |
kimcadmus wrote: I have two lines running from the canister to the carb. I will leave off the "bowl vent" line but what about the one that runs to the bottom of the bowl on the opposite (passenger) side?
That's the purge line. Disconnect at carb end and cap the carb fitting until you install the new charcoal can. |
|
| Author: | kimcadmus [ Thu Mar 14, 2013 7:59 pm ] |
| Post subject: | Update and thanks! |
Just wanted to say thanks for all the help with my truck last may. She has been running great ever since. Couldn't have done it without this forum. |
|
| Page 2 of 2 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|