Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum upgrade!
It is currently Thu Aug 16, 2018 10:22 pm

All times are UTC-07:00




Post new topic  Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Sun Jan 28, 2018 1:24 am 
Offline
Supercharged

Joined: Thu May 12, 2005 11:50 pm
Posts: 5870
Location: So California
Car Model*: 64 Plymouth Valiant
Thought I had it.

Does anyone have the Oregon Cam 2106R spec sheet you get from them when you get their cam?


Thanks

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes
Image


Top
   
PostPosted: Mon Jan 29, 2018 10:35 am 
Offline
EFI Slant 6
User avatar

Joined: Mon Aug 02, 2010 7:36 am
Posts: 454
Location: Rome, GA
Car Model*: 1963 Dart 270, 1980 D150
I too have wondered about this cam grind and maybe a couple more I have seen referenced in posts that do not appear in the cam lobe sheets listed here in the forum. I have to assume these are grinds on file at OCG but not listed on their lobe reference sheet. Still would be nice to see the specs on some of them.

_________________
Freedom is for fun.
-P. J. O'Rourke


Top
   
PostPosted: Mon Jan 29, 2018 6:16 pm 
Offline
EFI Slant 6
User avatar

Joined: Wed Nov 02, 2005 12:47 pm
Posts: 434
Location: Center Point, TX
Car Model*: 64 Plymouth Valiant
Just sent my core to them. Will post my card when it comes back if no one beats me to it.

sb


Top
   
PostPosted: Mon Jan 29, 2018 6:46 pm 
Offline
EFI Slant 6
User avatar

Joined: Mon Aug 02, 2010 7:36 am
Posts: 454
Location: Rome, GA
Car Model*: 1963 Dart 270, 1980 D150
mopar_nocar wrote:
Just sent my core to them. Will post my card when it comes back if no one beats me to it.

sb


'preciate it.

_________________
Freedom is for fun.
-P. J. O'Rourke


Top
   
PostPosted: Tue Jan 30, 2018 1:22 pm 
Offline
EFI Slant 6
User avatar

Joined: Mon Aug 02, 2010 7:36 am
Posts: 454
Location: Rome, GA
Car Model*: 1963 Dart 270, 1980 D150
Found this on another site:

#2106
210/214 @ .050”, 254/254 adv, .434”/.444” lift, 108 sep

I have to assume the 'R' means reverse the two lobe positions. Similar to the RV10.

_________________
Freedom is for fun.
-P. J. O'Rourke


Top
   
PostPosted: Wed Feb 14, 2018 5:58 pm 
Offline
EFI Slant 6
User avatar

Joined: Wed Nov 02, 2005 12:47 pm
Posts: 434
Location: Center Point, TX
Car Model*: 64 Plymouth Valiant
Grind # 2106R

Lobe separation: 108 intake centerline: 104 Exh centerline: 112

Intake opens 3 BTDC closes 31 ABDC
Exhaust opens 37 BBDC closes -7ATDC

Dur 214/210 @ .050
Lift 444/434

Valve clearance: Int .015 Exh .015

-4* overlap @ .050"

That's all of them that are pertinent, I think.

sb


Top
   
PostPosted: Wed Feb 14, 2018 7:05 pm 
Offline
Supercharged

Joined: Thu May 12, 2005 11:50 pm
Posts: 5870
Location: So California
Car Model*: 64 Plymouth Valiant
Looking for this:

https://onedrive.live.com/?cid=935E825B ... 39&o=OneUp


for the 2106R

_________________
Ed

64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

Image


Top
   
PostPosted: Thu Feb 15, 2018 10:17 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 23000
Location: North America
Car Model*:
Maybe give Oregon Cam Grinding a call and see if they'll send you it?

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
PostPosted: Thu Feb 15, 2018 5:01 pm 
Offline
EFI Slant 6
User avatar

Joined: Wed Nov 02, 2005 12:47 pm
Posts: 434
Location: Center Point, TX
Car Model*: 64 Plymouth Valiant
SlantSixDan wrote:
Maybe give Oregon Cam Grinding a call and see if they'll send you it?



I just posted everything from mine that I got in the mail yesterday.


emsvitil wrote:
Looking for this:

for the 2106R


What else do you need from it? PM your address, and I will mail you a copy of mine, if you like.

sb


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited