Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Mar 29, 2024 4:50 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Thu Sep 20, 2018 5:20 am 
Offline
EFI Slant 6
User avatar

Joined: Tue Aug 19, 2003 3:52 am
Posts: 264
Location: Helsinki Finland
Car Model: 1966 2D Dart
I have a new 6 bolt oil pump, engine block and sprayer. I was planned to install the sprayer to the block. A hole and metric M10x1.5 threads. I have read the instructions at the articles folder and found this :

...method uses a special hollow bolt & tube assembly, bolted into the unused block “pocket” where the oil pump mounts. A small “anti-siphon” or standoff tube is then used to connect & pressurize that pocket. The standoff tube can be installed in the oil pump or in the block Gear oiler shape and position, use thick wall - stiff tubing like NOS tubingpocket but be sure the tube extends to the top of the cavity. This will prevent the oil from draining out of the main galley after shutdown (oil drain back)...

Sorry but I dont get how to get oil to this unused pocket. Oil pump doesnt have hole and the block doesnt have it either. Could some one show a picture for the "anti-siphon or standoff tube" installed?

My parts under construction.

Image
Image
Image

_________________
1966 Dart. 170 cu.in. 200 rwhp.


Top
   
PostPosted: Thu Sep 20, 2018 6:54 am 
Offline
Turbo EFI

Joined: Tue May 17, 2005 4:26 pm
Posts: 1237
Location: CBS Newfoundland Canada
Car Model:
I have done both and they work, I think doug`s way of drilling the pump is the best way of oiling the gears contact area.


Top
   
PostPosted: Thu Sep 20, 2018 10:27 am 
Offline
EFI Slant 6
User avatar

Joined: Tue Aug 19, 2003 3:52 am
Posts: 264
Location: Helsinki Finland
Car Model: 1966 2D Dart
From where I can get instructions for that drilling?

_________________
1966 Dart. 170 cu.in. 200 rwhp.


Top
   
PostPosted: Thu Sep 20, 2018 12:17 pm 
Offline
SL6 Racer & Moderator
User avatar

Joined: Wed Jan 29, 2003 4:42 am
Posts: 8700
Location: Cox’s Creek, KY
Car Model: More cars than sense...
Here is a link to an article on the main home page. Lot of good articles there. I think this is the one you need.

http://www.slantsix.org/articles/oil-pu ... report.htm

_________________
Rob

I’m Mater
The Kentucky Poser

Image


Top
   
PostPosted: Mon Sep 24, 2018 6:15 am 
Offline
Turbo EFI

Joined: Tue May 17, 2005 4:26 pm
Posts: 1237
Location: CBS Newfoundland Canada
Car Model:
I have been looking for pictures doug sent me, not sure where they are but sure if you contact him he can share them again. drilling the pump is a lot better than the through block line in the article, even though drilling the passage can be bit of a challenge.


Top
   
PostPosted: Mon Sep 24, 2018 12:34 pm 
Offline
EFI Slant 6
User avatar

Joined: Sun Jan 11, 2004 11:19 am
Posts: 251
Location: Oulainen, Finland
Car Model: 1965 Valiant 170/A833/8 3/4SG
Image
Image
Image

I found these from Dougs pictures

Here is pics of my versio of squirter:

Image
Image
Image

This is VW 1.9Tdi oil squirter with pressure valve in bolt. I cut a groove to extra pocket to oil pump. Now thinking afterwards, maybe I could have drilled hole through, so it would not affect to gasket surface.


Top
   
PostPosted: Tue Sep 25, 2018 5:52 am 
Offline
Turbo EFI

Joined: Tue May 17, 2005 4:26 pm
Posts: 1237
Location: CBS Newfoundland Canada
Car Model:
great pictures, doug also said running a 9/16 tread tap through the shaft opening will help oil getting to the gear. I never tried this just drilled the oil line passage.


Top
   
PostPosted: Tue Sep 25, 2018 8:14 pm 
Offline
Board Sponsor
User avatar

Joined: Wed Nov 06, 2002 1:57 pm
Posts: 2195
Location: Everett, WA
Car Model:
So if I walk in to a auto parts store in the states, what model, year would that VW part be from?


Top
   
PostPosted: Wed Sep 26, 2018 2:48 am 
Offline
EFI Slant 6
User avatar

Joined: Sun Jan 11, 2004 11:19 am
Posts: 251
Location: Oulainen, Finland
Car Model: 1965 Valiant 170/A833/8 3/4SG
99-04 VW Jetta Golf Mk4 Beetle 1.9 TDI ALH For example


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 88 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited