Bolt size for the cast alternator bracket.

Unanswered topics | Active topics

Home » Board index » Tech Q & A » Engine

All times are UTC-07:00

Bolt size for the cast alternator bracket.

Post new topic Reply to topic

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

bwhitejr

Post subject: Bolt size for the cast alternator bracket.

PostPosted: Tue Apr 16, 2024 7:48 am

Offline

EFI Slant 6

Joined: Wed Apr 20, 2005 5:22 am
Posts: 491
Location: Missouri City, Texas (Houston Area)
Car Model:

Hi All,
What is the bolt size for the cast alternator bracket that bolts the bracket to the top engine? I have the two nuts, but can't find the bolt that goes in the hole at the top. I think it is a fine thread. It would help if I know what it looks like.

Thanks in advance

-bw-

_________________
'72 Duster (Performance 360)
'83 Ramcharger (Performance 318)
'80 TrailDuster (360)
'80 D-150 Truck (See Below)
CompCams 252S, Holley 390cfm, Offy manifold
Ported, Polished and Gasket Matched
P4286813 Springs,0.040 Overbore,
0.090 Shaved Head

Top

Profile

Reply with quote

Greg Ondayko

Post subject: Re: Bolt size for the cast alternator bracket.

PostPosted: Tue Apr 16, 2024 8:23 am

Offline

Supercharged

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 9078
Location: IRWIN PA
Car Model:

bwhitejr wrote:

I just installed this on Sunday.

3/8"-16 UNC for the 2 front bolts / Head / Block (use thread sealer on the bottom one as it threads into oil.)

and 5/16"-18 UNC for the rearmost bolt - no sealer needed.

Greg

_________________
http://www.youtube.com/hyperpack