Slant Six Forum
https://www.slantsix.org/forum/

porting
https://www.slantsix.org/forum/viewtopic.php?f=21&t=3533
Page 1 of 1

Author:  dogdigger [ Sun Apr 28, 2002 1:58 pm ]
Post subject:  porting

i am getting ready to build my engine up and i want to do some milding porting, i dont know where i need to remove materal and what i should use to do so.is this something i should try to do or could i do alot of damage? pictures would help so i can get an idea.

Author:  Tom Gilsdorf [ Mon Apr 29, 2002 6:18 pm ]
Post subject:  Re: porting

Once again, the good Dr. D has an outstanding article on the subject. Here's a link.

Gilly

Also check out <A HREF="http://flag.blackened.net/mopar/fig28.jpg">http://flag.blackened.net/mopar/fig28.jpg</A>

This shows the material you need to remove from the ports.

and

<A HREF="http://flag.blackened.net/mopar/heads.html">http://flag.blackened.net/mopar/heads.html</A>

Slant 6 Heads
tlg225ccr@aol.com

Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/