Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Mar 28, 2024 1:15 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Finally did it
PostPosted: Sun Nov 27, 2016 4:42 am 
Offline
2 BBL ''SuperSix''

Joined: Sun Jan 16, 2011 6:20 am
Posts: 23
Location: Dallas Tx
Car Model:
finally broke down and bought mega-squirt for my Cordoba. hopefully it will be here before the garage I'm building is finished


Top
   
 Post subject:
PostPosted: Mon Nov 28, 2016 6:26 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16447
Location: Blacksburg, VA
Car Model:
Congrats. Which MS ECU did you order, and what is your proposed EFI setup (TB, injectors, sensors...)?

Lou

_________________
Home of Slant6-powered fun machines


Top
   
 Post subject:
PostPosted: Mon Nov 28, 2016 5:14 pm 
Offline
2 BBL ''SuperSix''

Joined: Sun Jan 16, 2011 6:20 am
Posts: 23
Location: Dallas Tx
Car Model:
MegaSquirt-II 3.0 multi point injection with edis ignition using the throttle body off a 4.00 Jeep. sensors include IAC, TPS, o2, air charge temp, and crank. I think that is all I have planned.


Top
   
 Post subject:
PostPosted: Tue Nov 29, 2016 7:01 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16447
Location: Blacksburg, VA
Car Model:
Sounds great. Be careful with ignition setup, settings, and noise filtering...

Lou

_________________
Home of Slant6-powered fun machines


Top
   
 Post subject:
PostPosted: Tue Nov 29, 2016 7:12 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
That Jeep 4.0 TB works Well on the Slant.

I might Suggest to go with all GM sensors CLT IAT etc. as outlined in the Megamanual..

It will make getting started and running easier.

You wont have to adjust the thermisitor values in tunerstudio to compensate.

I had done a similar swap onto my daily driver back in 2008. Almost 9 years and lotsa street miles since then.

Be sure to spray the Relay board down with some conformal coating spray.

Here is a link to my build...
http://slantsix.org/forum/viewtopic.php?t=23886
Drove the car to work today. and Hopefully back home!

Best of luck.

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject:
PostPosted: Wed Nov 30, 2016 5:06 am 
Offline
2 BBL ''SuperSix''

Joined: Sun Jan 16, 2011 6:20 am
Posts: 23
Location: Dallas Tx
Car Model:
thanks for the suggestions, all the sensors are GM witht he exceptions of the
IAC, TPS, and Crank. I think I can swap out the IAC and the crank the TPS will take some looking into


Top
   
 Post subject:
PostPosted: Thu Dec 01, 2016 6:41 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
TPS and crank are okay to use Whatever.

I would use GM for the IAC.

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject:
PostPosted: Thu Dec 01, 2016 9:55 am 
Offline
Board Sponsor
User avatar

Joined: Fri Nov 01, 2002 8:20 pm
Posts: 1603
Location: Oxford, Georgia
Car Model:
The 4.0 Jeep - and most '90s era Chryslers - used GM type IAC valves to begin with; no need to change the valve out.

_________________
"Mad Scientist" Matt Cramer
'66 Dart - turbocharged 225
My blog - Mad Scientist Matt's Lair


Top
   
 Post subject:
PostPosted: Thu Dec 01, 2016 10:05 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Greg Ondayko wrote:
TPS and crank are okay to use Whatever.

I would use GM for the IAC.

Greg


I think I meant to Type IAT - Charge Temp Sensor.

good catch Matt!


Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject:
PostPosted: Fri Dec 02, 2016 4:03 am 
Offline
2 BBL ''SuperSix''

Joined: Sun Jan 16, 2011 6:20 am
Posts: 23
Location: Dallas Tx
Car Model:
thanks for the clarification. I wasn't looking forward to figuring out what IAC valve to use if I had to change it. already on board with the gm style sir temp sen


Top
   
 Post subject:
PostPosted: Fri Dec 02, 2016 11:07 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
sorry for any confusion.

Seems like you have the right idea.

Go Getum!

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 11 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited