Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Mar 28, 2024 9:45 pm

All times are UTC-07:00




Post new topic  Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Thu Sep 27, 2018 9:20 am 
Offline
3 Deuce Weber

Joined: Fri Apr 01, 2016 8:18 am
Posts: 62
Location: Tennessee
Car Model: 1973 Dodge Dart Swinger
I posted this in the fuel injection forum, but I also thought it should be posted here since both of our manifolds are designed to handle boosted applications.

This is my first post with the boosted forums, but It's been awhile since I've been active, but rest assured we have been quite busy at Gill Welding and Fabrication.
Here is what we've done:

- Fully developed our Mark II fuel injection manifold.

- Became Torqstorm Dealers.

- Became 14Point7 Wideband Dealers.

- Became Dealers for an overbored 62mm Jeep style throttle body.

- Fully developed our Mark II-R fuel injection manifold.

We've done all these things because we caught the slant six sickness and can't stop. We are currently working with TorqStorm to produce a kit for our Mark II manifold. The Kit will offer a discount of 35% vs buying the Mark II separately. This kit won't work with our new Mark II-R manifold due to its custom fit requirements (more below).

Our Mark II-R manifold was designed due to a large request for a front mount throttle body. It uses the same runners, injector angle, flanges, and plenum design as the Mark II. The Mark II-R supports the same Jeep style TB, but can handle up to 70 mm like the Mark II. The forward facing throttle body should allow for easy piping to your intercooler. We will be making a seperate Torqstorm kit for those who are interested in custom intercooling.

We've got our eyes cast to 2019 while we begin development on a full stainless steel turbo header. As for now we want to celebrate our current achievements with a $100 off promo on any TorqStorm sale using the following:

SC225

Make sure to contact us a http://www.gillwelding.com if you want to be added to the wait list for the Mark II, Mark II-R, Mark II TorqStorm Kit, or if you just want to say Hi!

Below are some solidworks images of the Mark II-R.

Thanks!
Image
Image
Image
Image
Image


Top
   
PostPosted: Thu Sep 27, 2018 10:29 am 
Offline
1 BBL (New)

Joined: Wed Nov 15, 2017 8:20 am
Posts: 2
Location: Denver, CO
Car Model: 1964 Dart Convertible
:D Rock!


Top
   
PostPosted: Mon Oct 01, 2018 6:47 am 
Offline
3 Deuce Weber

Joined: Fri Apr 01, 2016 8:18 am
Posts: 62
Location: Tennessee
Car Model: 1973 Dodge Dart Swinger
smcomanche,

Thanks for the feedback!


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited