Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum upgrade!
It is currently Sun Oct 21, 2018 6:20 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Cad file for K member
PostPosted: Mon Jun 25, 2018 1:19 am 
Offline
1 BBL (New)

Joined: Mon Feb 05, 2018 3:11 am
Posts: 6
Car Model*: vc valiant
Hi All
I have a 1966 vc valiant and was wondering if anyone has a CAD file for the K member. I want to do a FEA analysis on it with rack and pinion steering brackets grafted on it . ?
Cheers....Rob


Top
   
PostPosted: Mon Jun 25, 2018 3:12 am 
Offline
Board Sponsor

Joined: Wed Oct 23, 2002 7:57 pm
Posts: 5434
Location: Waynesboro, Pa.
Car Model*: 65 Valiant 2Dr Post
Quote:
FEA analysis


:?: :?: :?:

_________________
2 Mopars come with Spark plug tubes. One is a highly refined, record setting, world class, racing machine. The other is a 426 CI. boat anchor!
]Image


Top
   
PostPosted: Mon Jun 25, 2018 4:00 am 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 6911
Location: Silver Springs, Fl.
Car Model*:
I will hazard a guess
Front
End
Alignment

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 225 nitrous
64 Valiant Signet
64 Valiant 4dr 170


Top
   
PostPosted: Mon Jun 25, 2018 4:59 am 
Offline
Supercharged

Joined: Thu May 12, 2005 11:50 pm
Posts: 5916
Location: So California
Car Model*: 64 Plymouth Valiant
Finite Element A? Analysis

I think the A is for Analysis, so you really only need to say is FEA, not FEA analysis.

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes
Image


Top
   
PostPosted: Mon Jun 25, 2018 8:53 am 
Offline
Turbo EFI

Joined: Sat Feb 20, 2010 10:23 am
Posts: 1082
Location: N. Ga.
Car Model*:
3D modeling software like Solidworks allows you to do stress analysis simulations if you have that as an add-on to the package. It's a worldwide standard for design software that engineers use to design and test or evaluate parts before they actually make them.

_________________
There's no such thing as too much cam....only not enough engine!
Image


Top
   
PostPosted: Mon Jun 25, 2018 2:46 pm 
Offline
TBI Slant 6

Joined: Thu Jun 04, 2015 6:19 pm
Posts: 175
Location: Florida
Car Model*:
emsvitil wrote:
Finite Element A? Analysis

I think the A is for Analysis, so you really only need to say is FEA, not FEA analysis.


So I shouldn't Xerox a copy? :lol:


Top
   
PostPosted: Tue Jun 26, 2018 5:57 am 
Offline
1 BBL (New)

Joined: Mon Feb 05, 2018 3:11 am
Posts: 6
Car Model*: vc valiant
Is that similar to soder or solder ?


Top
   
PostPosted: Sun Jul 29, 2018 5:45 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 4482
Location: IRWIN PA
Car Model*:
I doubt anyone has one of those..

Based on the lack of response etc.

Best bet would be to find an old drafted copy if possible etc and Model one from there.

I think that Putting a Rack on most of the old k Frames with 1/4" Plate would be fine.

Remember that the Old Box and Idler arm was there with thinner metal so I would be confident in the retrofit.


Greg

_________________
Greg Ondayko
69 Dart http://www.youtube.com/hyperpack
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited