Slant Six Forum
https://www.slantsix.org/forum/

When Fel-Pro No Longer Decides to Support Slants
https://www.slantsix.org/forum/viewtopic.php?f=32&t=62375
Page 1 of 2

Author:  Greg Ondayko [ Mon May 21, 2018 8:27 am ]
Post subject:  When Fel-Pro No Longer Decides to Support Slants

I am going to attempt to digitize all of the simple gaskets as time permits.

These are Laser cut on cardstock for test fitting.
Image

If they are good I will post the drawings up soon.

Greg

Author:  Reed [ Mon May 21, 2018 10:04 am ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants

Awesome, thanks!

Author:  sandy in BC [ Mon May 21, 2018 10:19 am ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants

Moving the sport foreword....thanks

Author:  Joshie225 [ Mon May 21, 2018 10:55 am ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants

If FelPro doesn't support the slant then Best Gasket certainly would. They cover the flathead 6s already. bestgasket.com

Author:  Greg Ondayko [ Tue May 22, 2018 11:55 am ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants

Joshie225 wrote:
If FelPro doesn't support the slant then Best Gasket certainly would. They cover the flathead 6s already. bestgasket.com




Good to know Josh,

I wasn't aware of that resource.

Greg

Author:  CNC-Dude [ Tue May 22, 2018 4:22 pm ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants

I've been making a copper intake/exhaust gasket with large ports for ported heads now for almost 5 years. It was featured in the Slant Sickness article last fall in Mopar Muscle. Guess no body is paying attention. I can do them in a composition style material as well, just haven't.

Author:  drgonzo [ Wed May 23, 2018 8:52 am ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants

CNC-Dude, you have a PM.

Author:  CNC-Dude [ Wed May 23, 2018 1:14 pm ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants

Received! Thanks.

Author:  Tim Keith [ Sat Apr 13, 2019 9:28 pm ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants

https://www.youtube.com/watch?v=5ae4NDjHr4Y

Author:  terrylittlejohn [ Thu Oct 24, 2019 5:37 am ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants

yes I have a copper one! thanks for giving a great replacement option !

Author:  CNC-Dude [ Fri Mar 27, 2020 6:58 am ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants

Thanks Terry, just trying to give the Slant community options with products and designs to help fill the void when big companies decide to terminate theirs.

Author:  74A1Swinger [ Tue Jul 12, 2022 1:48 pm ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants

Tim Keith wrote:
https://www.youtube.com/watch?v=5ae4NDjHr4Y


:lol: :lol: :lol:

Author:  volaredon [ Tue Jul 12, 2022 6:33 pm ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants

looks like not just Fel Pro. having heard about the Fel pro oil pump gaskets going NLA, I checked Victor Reinz. Same result. Had a "star" by the PN in the online listings I found, footnote says star meant "discontinued".

Author:  74A1Swinger [ Thu Jul 14, 2022 10:15 am ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants

volaredon wrote:
looks like not just Fel Pro. having heard about the Fel pro oil pump gaskets going NLA, I checked Victor Reinz. Same result. Had a "star" by the PN in the online listings I found, footnote says star meant "discontinued".


Sounds like they are trying to get everyone to cough up the money to buy the complete engine gasket package every time you want only 1 item. I had to do that in order to get the distributor engine seal.

Looks like a nickel and a dime have just gone up in price again!

Author:  volaredon [ Thu Jul 14, 2022 8:54 pm ]
Post subject:  Re: When Fel-Pro No Longer Decides to Support Slants

There's a guy on the FABO site that a has a huge pile of the distributor o rings (both, never realized that there was 2 of them used to seal a/6 distributor) he had listed for sale over there. Check out "halifaxhops". I got like 3 sets from him a couple of months ago, and recently seen that he still has quite a few.

Page 1 of 2 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/