Slant Six Forum
http://www.slantsix.org/forum/

Cad file for K member
http://www.slantsix.org/forum/viewtopic.php?f=32&t=62516
Page 1 of 1

Author:  vc valiant [ Mon Jun 25, 2018 1:19 am ]
Post subject:  Cad file for K member

Hi All
I have a 1966 vc valiant and was wondering if anyone has a CAD file for the K member. I want to do a FEA analysis on it with rack and pinion steering brackets grafted on it . ?
Cheers....Rob

Author:  Rick Covalt [ Mon Jun 25, 2018 3:12 am ]
Post subject:  Re: Cad file for K member

Quote:
FEA analysis


:?: :?: :?:

Author:  Charrlie_S [ Mon Jun 25, 2018 4:00 am ]
Post subject:  Re: Cad file for K member

I will hazard a guess
Front
End
Alignment

Author:  emsvitil [ Mon Jun 25, 2018 4:59 am ]
Post subject:  Re: Cad file for K member

Finite Element A? Analysis

I think the A is for Analysis, so you really only need to say is FEA, not FEA analysis.

Author:  CNC-Dude [ Mon Jun 25, 2018 8:53 am ]
Post subject:  Re: Cad file for K member

3D modeling software like Solidworks allows you to do stress analysis simulations if you have that as an add-on to the package. It's a worldwide standard for design software that engineers use to design and test or evaluate parts before they actually make them.

Author:  jcc [ Mon Jun 25, 2018 2:46 pm ]
Post subject:  Re: Cad file for K member

emsvitil wrote:
Finite Element A? Analysis

I think the A is for Analysis, so you really only need to say is FEA, not FEA analysis.


So I shouldn't Xerox a copy? :lol:

Author:  vc valiant [ Tue Jun 26, 2018 5:57 am ]
Post subject:  Re: Cad file for K member

Is that similar to soder or solder ?

Author:  Greg Ondayko [ Sun Jul 29, 2018 5:45 pm ]
Post subject:  Re: Cad file for K member

I doubt anyone has one of those..

Based on the lack of response etc.

Best bet would be to find an old drafted copy if possible etc and Model one from there.

I think that Putting a Rack on most of the old k Frames with 1/4" Plate would be fine.

Remember that the Old Box and Idler arm was there with thinner metal so I would be confident in the retrofit.


Greg

Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/