Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Mar 28, 2024 4:54 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Torqstorm Kits.
PostPosted: Wed Sep 26, 2018 12:37 pm 
Offline
3 Deuce Weber

Joined: Fri Apr 01, 2016 8:18 am
Posts: 62
Location: Tennessee
Car Model: 1973 Dodge Dart Swinger
Hi all,

I've been around here a little while and have made a few posts on Gill Welding and Fabrications MPFI Manifold for the slant. I've also been selling -8AN fuel rail kits here before.

Recently Gill Welding & Fabrication became TorqStorm dealers! To celebrate we are giving $100 off the Slant Six Kit. Head on over to our website below:
http://www.gillwelding.com

Add the Torqstorm to your cart with your options and finish (billet, polished, or black).
Then use the promo code below:

SC225

We will be running this deal for a limited amount of uses for the next 30 days.

**This sale has been extended to 11/26/2018 **
After the sale ends contact us for a members discount you can PM here or contact us at http://www.gillwelding.com


Big things are happening around Gill Welding & Fabrication. There will be a MPFI Kit for the Torqstorm soon.

Thank you.


Top
   
 Post subject: Re: Torqstorm Kits.
PostPosted: Fri Jan 25, 2019 11:36 am 
Offline
Turbo EFI
User avatar

Joined: Wed Feb 23, 2005 1:50 pm
Posts: 2353
Location: Pertneer Nashville TN
Car Model:
I'm poking around your site. A turbo EFI slant for my Duster is a goal. Keep up the good work!

_________________
'72 Duster 198 stock cam, 3:23's Hookers on jack stands for 8 years in the driveway
'79 Maxivan 360 Offy Qjet Comp RV cam/rusting in the driveway.
93 D350 160HP Cummins Auto :-( Dually Clubcab needs a injector pump
2005 Golden Couch Buick


Top
   
 Post subject: Re: Torqstorm Kits.
PostPosted: Wed Jan 30, 2019 12:31 pm 
Offline
3 Deuce Weber

Joined: Fri Apr 01, 2016 8:18 am
Posts: 62
Location: Tennessee
Car Model: 1973 Dodge Dart Swinger
Rug_Trucker wrote:
I'm poking around your site. A turbo EFI slant for my Duster is a goal. Keep up the good work!



We have just started the first prototype for a full SS turbo header. The goal is for a top notch header that will take the guesswork out of a turbo build. The site will be updated very soon as we assemble Lab Rat's new engine so we are hard at it! Please if you need any help with anything or are interested in products let me know via contact@gillwelding.com Our parts that we offer grows in number almost weekly.


Top
   
 Post subject: Re: Torqstorm Kits.
PostPosted: Wed Jan 30, 2019 1:57 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16447
Location: Blacksburg, VA
Car Model:
I am interested in a SS turbo header and I bet they would sell well. Let us know if you want thoughts on pipe routing, etc. I have been running a turbo for 7 yrs and have driven coast to coast and to many drag races and back (every time - 30 of them?).

Best wishes,

Lou

_________________
Home of Slant6-powered fun machines


Top
   
 Post subject: Re: Torqstorm Kits.
PostPosted: Fri Feb 01, 2019 6:58 am 
Offline
3 Deuce Weber

Joined: Fri Apr 01, 2016 8:18 am
Posts: 62
Location: Tennessee
Car Model: 1973 Dodge Dart Swinger
Dart270 wrote:
I am interested in a SS turbo header and I bet they would sell well. Let us know if you want thoughts on pipe routing, etc. I have been running a turbo for 7 yrs and have driven coast to coast and to many drag races and back (every time - 30 of them?).

Best wishes,

Lou


Lou,

As usual we appreciate your feedback. We are in the planning stages for the flanges. We will be aiming for quick spool times for street/strip. We are hoping to support the 650 HP area without killing off the engines that are in the 200 HP area. We don't want this to be a product that requires modification to make it fit. Most likely the small size starter will be required. We are looking at 1.5" primaries to produce quick spool time, but also to be big enough that they don't hinder top end performance too much. Once we get the initial idea down it won't be too hard to change primary size in case someone wants to push over 650 HP.


Top
   
 Post subject: Re: Torqstorm Kits.
PostPosted: Sat Feb 02, 2019 4:43 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16447
Location: Blacksburg, VA
Car Model:
Sounds great. No problem to require small starter as most people run those and they are easy to get.

Lou

_________________
Home of Slant6-powered fun machines


Top
   
 Post subject: Re: Torqstorm Kits.
PostPosted: Sun Oct 13, 2019 8:13 am 
Offline
Site Admin
User avatar

Joined: Sat Oct 12, 2002 12:57 am
Posts: 1359
Location: Grass Valley, Ca.
Car Model: '63 Dodge Dart GT Convertible
I went to the site shown, went to Projects, clicked on the '73 Dart and got this:

We Couldn’t Find This Page

Check out some of the other great posts in this blog.

_________________
Chuck Rivers, Webmaster
Image Image Image Image


Top
   
 Post subject: Re: Torqstorm Kits.
PostPosted: Fri Nov 08, 2019 3:18 pm 
Offline
3 Deuce Weber

Joined: Fri Apr 01, 2016 8:18 am
Posts: 62
Location: Tennessee
Car Model: 1973 Dodge Dart Swinger
Chuck wrote:
I went to the site shown, went to Projects, clicked on the '73 Dart and got this:

We Couldn’t Find This Page

Check out some of the other great posts in this blog.


Chuck,


Thank you for the reply. The website had a few updates recently. It should be all taken care of. We appreciate the feedback.
For the rest of those that have commented the SS turbo headers are still in the pipeline. We just had our flanges finished. We are working on the piping and pricing for the piping next.

Thank you,
Bryce
Gill Welding & Fabrication
http://www.gillwelding.com


Top
   
 Post subject: Re: Torqstorm Kits.
PostPosted: Thu Feb 06, 2020 1:08 pm 
Offline
2 BBL ''SuperSix''

Joined: Mon May 06, 2019 11:14 am
Posts: 22
Location: St. Louis, Missouri
Car Model: 64 Dart Convertible, /6, stick, 62 Lancer Wagon
I am a fan and follower of Gill Welding. I want to boost my Slant for my 4 speed 64 Dart.
I started out with the idea that Supercharging would be the easier cleaner route, but am now looking at Turbo.

If you have a general plan to follow with your new turbo exhaust I think you made my decision for me.

Anxiously waiting.

James

Fred was my Dad's name and I learned quite a bit about cars in his garage.

_________________
64 Dart, 62 Lancer , Slant power


Top
   
 Post subject: Re: Torqstorm Kits.
PostPosted: Tue Nov 03, 2020 8:05 am 
Offline
Site Admin
User avatar

Joined: Sat Oct 12, 2002 12:57 am
Posts: 1359
Location: Grass Valley, Ca.
Car Model: '63 Dodge Dart GT Convertible
"Our exhuast manifold intake heater was already capped off with a welded plate."

Mis-spelled "exhaust" on Lab Rat page. :wink:

_________________
Chuck Rivers, Webmaster
Image Image Image Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 10 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited