Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Mar 29, 2024 5:09 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 13 posts ] 
Author Message
 Post subject: Band Sawed Slant 6 Head
PostPosted: Mon Nov 23, 2009 3:59 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Sep 20, 2006 7:08 pm
Posts: 1114
Location: The Hand
Car Model:
Mods...maybe a sticky?

I don't have the head any longer so these are the only pics I have. I sent it to member Lucky13. I think he may have passed as he was having health issues. He hasn't been on since last June. I even sent a letter to his home with no response. :(

Intake on the left. Notice the deck thickness.
Image

Intake on the right
Image

Intake on the right. Your machinest needs to be careful with hardened exhaust seats as there is not much material there.
Image

_________________
11.02 @ 120.56
http://www.youtube.com/watch?v=EAxRmoDgsdY
Chassis dyno
http://www.youtube.com/watch?v=wd6hFGzLJMc


Top
   
 Post subject:
PostPosted: Mon Nov 23, 2009 5:32 pm 
Offline
TBI Slant 6
User avatar

Joined: Sun Dec 28, 2008 1:12 pm
Posts: 227
Location: Nashville
Car Model:
This is great stuff for anyone planning a port job. Thanks!

_________________
72 dart acquired 12/08 /6,holley2b, mopar perf intake, mopar perf header, cam, built motor,904 finally re-installed, 8.75....still needs sorting out.
99 dakota 318 5 speed reg cab picked up 9/09; Trans finally fixed! woohoo!


Top
   
 Post subject:
PostPosted: Mon Nov 23, 2009 7:09 pm 
Offline
Board Sponsor & SL6 Racer
User avatar

Joined: Fri Nov 08, 2002 4:48 pm
Posts: 5835
Location: Burton BC canada
Car Model:
Cool stuff Shaker! Thanks!

_________________
Yeah....Im the one who destroyed this rare, vintage automobile.....

Image


Top
   
 Post subject:
PostPosted: Tue Nov 24, 2009 10:38 am 
Offline
Turbo Slant 6

Joined: Sat Aug 11, 2007 1:17 pm
Posts: 776
Location: Jacksonville, Fl
Car Model:
ah very nice !!

-Mike

_________________
I am the Guardian, I hate helos, everything leaks.......


Top
   
 Post subject:
PostPosted: Tue Nov 24, 2009 3:16 pm 
Offline
Board Sponsor & SL6 Racer
User avatar

Joined: Sun Jul 30, 2006 8:36 pm
Posts: 2432
Location: East Arkansas
Car Model:
Do you remember what gereration head this was? Was the head stock or all ready messaged?
Thanks for some great pictures.
Frank

_________________
Scrapple: Because a mind is a terrible thing to waste.
73 Duster - Race Car
66 Dart Wagon - DD
178" FED
82 D150
All Slant powered


Top
   
 Post subject:
PostPosted: Wed Nov 25, 2009 5:23 am 
Offline
Turbo EFI
User avatar

Joined: Wed Sep 20, 2006 7:08 pm
Posts: 1114
Location: The Hand
Car Model:
It was a stock head that was untouched. It was a drool tube head but don't recall the casting #.

_________________
11.02 @ 120.56

http://www.youtube.com/watch?v=EAxRmoDgsdY

Chassis dyno

http://www.youtube.com/watch?v=wd6hFGzLJMc


Top
   
 Post subject:
PostPosted: Wed Nov 25, 2009 5:27 am 
Offline
Board Sponsor
User avatar

Joined: Fri Nov 01, 2002 8:20 pm
Posts: 1603
Location: Oxford, Georgia
Car Model:
Thanks for posting this. It had me dreaming about porting the head on the Dart... literally.

_________________
"Mad Scientist" Matt Cramer
'66 Dart - turbocharged 225
My blog - Mad Scientist Matt's Lair


Top
   
 Post subject:
PostPosted: Wed Dec 02, 2009 9:24 pm 
Offline
TBI Slant 6
User avatar

Joined: Wed Jul 02, 2008 10:12 pm
Posts: 164
Location: Vernal Utah
Car Model:
Thanks that give me the "courage" I needed to grab the die grinder and start a light port job. Great pictures

_________________
Thanks Mike


Top
   
 Post subject:
PostPosted: Tue Dec 08, 2009 5:29 am 
Offline
TBI Slant 6

Joined: Tue Aug 29, 2006 7:13 pm
Posts: 233
Car Model:
shaker, i know the head is gone but, any guess or measurment to how thick is the deck ? looks like 3/8" or more to me. thanks, ronnie


Top
   
 Post subject:
PostPosted: Tue Dec 08, 2009 9:39 am 
Offline
Turbo EFI
User avatar

Joined: Wed Sep 20, 2006 7:08 pm
Posts: 1114
Location: The Hand
Car Model:
1969ronnie wrote:
shaker, i know the head is gone but, any guess or measurment to how thick is the deck ? looks like 3/8" or more to me. thanks, ronnie


It's probably closer to 1/2". Look at the diameter of the quarter vs the deck.

_________________
11.02 @ 120.56

http://www.youtube.com/watch?v=EAxRmoDgsdY

Chassis dyno

http://www.youtube.com/watch?v=wd6hFGzLJMc


Top
   
 Post subject:
PostPosted: Sun Apr 07, 2013 4:42 am 
Offline
EFI Slant 6
User avatar

Joined: Sun Jun 10, 2012 3:54 pm
Posts: 349
Location: Terre Haute IN
Car Model:
I know I know, I keep reviving old threads but here goes...

Currently on a ipad so I can't do the work I want but the photos will still yield measurements w a little work. The standard qtr is .955 inches. Or 1" without getting to technical, so then if some one laid out grid work or even used a guide on the photo by measuring the qtr first, one could use it to ID how thick the deck is etc.

Now here's why I posted, in the top photo there is a pocket under both qtrs and one has a hole the other doesn't. What are the pockets? Coolant pockets? I'm brainstorming again and found these photos and the pockets are in the way! Lol. So educate the young in if anyone knows pls.

_________________
225, Offenhauser, Holley 350, A833OD, 3:55, GM HEI,99 Durango starter
BOOSTED! WH1C, BIG FMIC, 10#
Operation Noble Eagle 03-05
Operation Iraqi Freedom 05-07
Operation Enduring Freedom 12- 13


Top
   
 Post subject: Yep.
PostPosted: Sun Apr 07, 2013 7:34 am 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9760
Location: Salem, OR
Car Model:
Quote:
What are the pockets? Coolant pockets?


Yes that's a coolant passage, the one that doesn't have them is the end of the head (see the rocker shaft stand at the top of the "chunk").

-D.Idiot


Top
   
 Post subject:
PostPosted: Sun Apr 07, 2013 8:29 am 
Offline
EFI Slant 6
User avatar

Joined: Sun Jun 10, 2012 3:54 pm
Posts: 349
Location: Terre Haute IN
Car Model:
Well there goes that idea :evil: , roaming the web and thinking I had thought of cold start injectors and long story short I was trying to incorporate as close to direct injection as we could get.
Image
Sometching like that was the thought but never mind. If the injector stuck in far enough and fire downward. An injecto like this
Image
So that was the thought but with coolant in the way that would really mess things up. So onward with more wild thoughts... :roll:

_________________
225, Offenhauser, Holley 350, A833OD, 3:55, GM HEI,99 Durango starter

BOOSTED! WH1C, BIG FMIC, 10#

Operation Noble Eagle 03-05

Operation Iraqi Freedom 05-07

Operation Enduring Freedom 12- 13


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 13 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: Google [Bot] and 64 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited