Slant Six Forum,  Forum Index
Slant Six Forum,  Forum Index
Slant Six Forum,  Forum Index
Home Slant Six Forum,  Forum Index Log in Register FAQ Memberlist Search

Click here to make a New Year's donation to the Slant Six Forum!

82 Dodge Ram D-150

 
Post new topic   Reply to topic    Slant Six Forum, Forum Index -> Other
Select message display options:             View previous topic :: View next topic  
Author Message
Ckaczmarek
1 BBL (New)


Joined: 24 Feb 2012
Posts: 4
Location: Oregon

Post subject: 82 Dodge Ram D-150 (Sat May 12, 2012 7:25 pm) Reply with quote

[img]http://www.flickr.com/photos/78395188@N05/7185516912/in/photostream[/img] My beautiful 82 Dodge D-150. I know a little bit about this truck, where is was made its got a 225 with a three speed automatic. Tops out about 80 and what not. The general point is i'd like to restore this truck as an FFA restoration project, And i have no idea where to start. Any ideas?



_________________
82 D-150
Back to top
View user's profile Send private message
Tim Keith
Board Sponsor


Joined: 02 Nov 2002
Posts: 676
Location: San Antonio, Texas

Post subject: (Sat May 12, 2012 9:04 pm) Reply with quote

Looks like a good truck that does not need much work. What is the upholstery like ?


Back to top
View user's profile Send private message
Ckaczmarek
1 BBL (New)


Joined: 24 Feb 2012
Posts: 4
Location: Oregon

Post subject: (Sun May 13, 2012 1:07 pm) Reply with quote

its not terrible, the leather has a few cracks but no full tears.



_________________
82 D-150
Back to top
View user's profile Send private message
walpolla
Turbo Slant 6


Joined: 05 Nov 2006
Posts: 514
Location: Rawson,Australia

Post subject: (Sun May 13, 2012 3:14 pm) Reply with quote

CLICK HERE for an easy view of his truck.

regards,Rod (nice truck BTW)


Back to top
View user's profile Send private message
Tim Keith
Board Sponsor


Joined: 02 Nov 2002
Posts: 676
Location: San Antonio, Texas

Post subject: (Sun May 13, 2012 3:34 pm) Reply with quote

I did not see any photos of the interior. In south Texas the sun is hard on the interior. My '78 GMC needs pretty much everything except a seat. Prices at LMC are spendy, but most is avaiiable. Not sure if Dodge has as much aftermarket support as Ford and Chevy.

Now and then I see a truck like your Dodge that is very clean, they often aren't too bad on the body.

FFA is a good organization to be a part of.


Back to top
View user's profile Send private message
rlklaus
EFI Slant 6


Joined: 22 Mar 2006
Posts: 320
Location: Portland, Oregon

Post subject: (Sun May 13, 2012 4:01 pm) Reply with quote

Nice looking truck. You will find lots of slant sixers are right here in Oregon.
Looks like you have and good project on your hands. Keep us posted as you get into it. I live just outside Portland, but get to all 48 states on my job. Might be able to lend a hand, if you find that special part, but it's too far away.



_________________
66 Valiant, 225.
84 Van, 225.
71 Maxi-Van, 318
60 Valiant wagon, 225
87 Maxi-Van, 318 4spd
Back to top
View user's profile Send private message
Ckaczmarek
1 BBL (New)


Joined: 24 Feb 2012
Posts: 4
Location: Oregon

Post subject: (Sun May 13, 2012 9:40 pm) Reply with quote

Thanks guys, ill try to post pictures of the interior tomorrow.



_________________
82 D-150
Back to top
View user's profile Send private message
Ceej
SSRN National Champion


Joined: 31 Mar 2003
Posts: 6329
Location: Oregon

Post subject: (Wed May 16, 2012 7:26 pm) Reply with quote

When are you coming over to finish the upgrades? Very Happy

No Saturn?

CJ



_________________

Tyrde-Browne Racing

I'm off to find myself. If I should return before I get back, keep me here.
Back to top
View user's profile Send private message Send e-mail
Ross
EFI Slant 6


Joined: 20 Dec 2010
Posts: 421
Location: Gresham, OR

Post subject: (Wed May 16, 2012 10:25 pm) Reply with quote

Nice truck! Looks to be fairly straight. Some of those things (tailgate, headlight bezel with turn signal) can be found at local pick n pull or u pull it yards. In the portland south pick n pull yard (the one yard i go to a lot) has had many 1st gens that i have pulled things off of for my own truck. There isnt a very big after market for old dodge trucks which really sucks but just looking around on the internet doesnt hurt. I know a lot of people dont like ebay but ive seen many parts for our trucks on there. Just remember that anything from an 81' to 93' dodge truck or ramcharger will fit. If you need help finding parts let me know and i can search some yards. Not knowing where exactly in oregon you live i cant point you to anything specific. Ill send you a pm (private message) with a website that has a lot of diy things for first gens that can help fix your truck.



_________________
Prerunner build: 82 Ram D150 Custom, 225, 4 speed manual. 2.5" exhaust. Hei ignition. Partially blacked out. Many mods
Back to top
View user's profile Send private message
Ckaczmarek
1 BBL (New)


Joined: 24 Feb 2012
Posts: 4
Location: Oregon

Post subject: (Mon May 28, 2012 2:59 pm) Reply with quote

I'll come over whenever im invited over Very Happy



_________________
82 D-150
Back to top
View user's profile Send private message
Select message display options:   
Post new topic   Reply to topic    Slant Six Forum, Forum Index -> Other All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
Go To Slant Six Forum Home

Mopar Ring Member Site
Mopar Ring Member Site



Powered by phpBB © 2001, 2005 phpBB Group
Theme created by Vjacheslav Trushkin, modified by Chuck Rivers