|
|
| Author |
Message |
Mike_64_Valiant
EFI Slant 6
Joined: 18 Apr 2007
Posts: 258
Location: Back in Tucson, AZ
|
|
Post subject:
slant-6 v8 tranny adapter
(Sat Jan 14, 2012 8:59 am)
|
 |
|
|
I have one sitting in the shop and dont really have a need for it, I decided to go with a T-5 and made an adapter for that.
My question is what are the measurements I need to know to figure out if it was large hub or small hub register. And are they all large pilot input holes?
Whats a fair asking price? I know they are heavy so shipping is going to be high.
|
|
| Back to top |
|
Dart270
Board Sponsor & Moderator
Joined: 21 Oct 2002
Posts: 9653
Location: Blacksburg, VA
|
|
Post subject:
(Sat Jan 14, 2012 10:10 am)
|
|
|
|
It should be small hub, since they only made the plates up to '67 and '68 was first year for big hub. Mine is small hub. I lathed out the ID of the foreward end of the flex plate adapter ring to fit my big hub crank.
FYI, the small hub is 1.555" ID (in crank) and the big hub is 1.815" ID. These are off the top of my head, and am pretty sure they're right. Big hub for sure.
Lou
_________________
Return of the 64 Dart. Hang on...
|
|
| Back to top |
|
terrylittlejohn
Turbo Slant 6
Joined: 17 May 2005
Posts: 967
Location: CBS Newfoundland Canada
|
|
Post subject:
(Sat Jan 14, 2012 7:33 pm)
|
|
|
|
| any way to get a template made and mailed?
|
|
| Back to top |
|
Mike_64_Valiant
EFI Slant 6
Joined: 18 Apr 2007
Posts: 258
Location: Back in Tucson, AZ
|
|
Post subject:
(Tue Jan 17, 2012 5:49 pm)
|
|
|
|
| I have had a couple requests for pictures and measurements I will see what I can do. It may be a week or two really swamped with work and family house projects.
|
|
| Back to top |
|
terrylittlejohn
Turbo Slant 6
Joined: 17 May 2005
Posts: 967
Location: CBS Newfoundland Canada
|
|
Post subject:
(Tue Jan 17, 2012 7:16 pm)
|
|
|
|
| thanks
|
|
| Back to top |
|
Stoopid john
2 BBL ''SuperSix''
Joined: 11 Jun 2011
Posts: 20
Location: Port Richey, FL
|
|
Post subject:
(Fri Feb 03, 2012 9:56 pm)
|
|
|
|
I sent a PM
john
_________________
1967 Dodge A100 Van
|
|
| Back to top |
|
greasmnky
4 BBL ''Hyper-Pak''
Joined: 23 Dec 2005
Posts: 34
Location: Merritt,British Columbia
|
|
Post subject:
(Sun Feb 12, 2012 5:44 pm)
|
|
|
|
| The large hub adapter was also available well into the 70's ,our brand new 75 B100, /6, 3 speed, optional 11" clutch, used an adapter for the V8 bell housing with a low starter mount .
|
|
| Back to top |
|
|
