|
|
| Author |
Message |
Ckaczmarek 1 BBL (New)
Joined: 24 Feb 2012 Posts: 4 Location: Oregon
|
|
Post subject:
82 Dodge Ram D-150
(Sat May 12, 2012 7:25 pm)
|
|
|
|
| [img]http://www.flickr.com/photos/78395188@N05/7185516912/in/photostream[/img] My beautiful 82 Dodge D-150. I know a little bit about this truck, where is was made its got a 225 with a three speed automatic. Tops out about 80 and what not. The general point is i'd like to restore this truck as an FFA restoration project, And i have no idea where to start. Any ideas?
_________________ 82 D-150
|
|
| Back to top |
|
Tim Keith Board Sponsor

Joined: 02 Nov 2002 Posts: 676 Location: San Antonio, Texas
|
|
Post subject:
(Sat May 12, 2012 9:04 pm)
|
|
|
|
| Looks like a good truck that does not need much work. What is the upholstery like ?
|
|
| Back to top |
|
Ckaczmarek 1 BBL (New)
Joined: 24 Feb 2012 Posts: 4 Location: Oregon
|
|
Post subject:
(Sun May 13, 2012 1:07 pm)
|
|
|
|
| its not terrible, the leather has a few cracks but no full tears.
_________________ 82 D-150
|
|
| Back to top |
|
walpolla Turbo Slant 6

Joined: 05 Nov 2006 Posts: 514 Location: Rawson,Australia
|
|
Post subject:
(Sun May 13, 2012 3:14 pm)
|
|
|
|
CLICK HERE for an easy view of his truck.
regards,Rod (nice truck BTW)
|
|
| Back to top |
|
Tim Keith Board Sponsor

Joined: 02 Nov 2002 Posts: 676 Location: San Antonio, Texas
|
|
Post subject:
(Sun May 13, 2012 3:34 pm)
|
|
|
|
I did not see any photos of the interior. In south Texas the sun is hard on the interior. My '78 GMC needs pretty much everything except a seat. Prices at LMC are spendy, but most is avaiiable. Not sure if Dodge has as much aftermarket support as Ford and Chevy.
Now and then I see a truck like your Dodge that is very clean, they often aren't too bad on the body.
FFA is a good organization to be a part of.
|
|
| Back to top |
|
rlklaus EFI Slant 6
Joined: 22 Mar 2006 Posts: 320 Location: Portland, Oregon
|
|
Post subject:
(Sun May 13, 2012 4:01 pm)
|
|
|
|
Nice looking truck. You will find lots of slant sixers are right here in Oregon.
Looks like you have and good project on your hands. Keep us posted as you get into it. I live just outside Portland, but get to all 48 states on my job. Might be able to lend a hand, if you find that special part, but it's too far away.
_________________ 66 Valiant, 225.
84 Van, 225.
71 Maxi-Van, 318
60 Valiant wagon, 225
87 Maxi-Van, 318 4spd
|
|
| Back to top |
|
Ckaczmarek 1 BBL (New)
Joined: 24 Feb 2012 Posts: 4 Location: Oregon
|
|
Post subject:
(Sun May 13, 2012 9:40 pm)
|
|
|
|
| Thanks guys, ill try to post pictures of the interior tomorrow.
_________________ 82 D-150
|
|
| Back to top |
|
Ceej SSRN National Champion

Joined: 31 Mar 2003 Posts: 6329 Location: Oregon
|
|
Post subject:
(Wed May 16, 2012 7:26 pm)
|
|
|
|
When are you coming over to finish the upgrades?
No Saturn?
CJ_________________
Tyrde-Browne Racing
I'm off to find myself. If I should return before I get back, keep me here. |
|
| Back to top |
|
Ross EFI Slant 6

Joined: 20 Dec 2010 Posts: 421 Location: Gresham, OR
|
|
Post subject:
(Wed May 16, 2012 10:25 pm)
|
|
|
|
Nice truck! Looks to be fairly straight. Some of those things (tailgate, headlight bezel with turn signal) can be found at local pick n pull or u pull it yards. In the portland south pick n pull yard (the one yard i go to a lot) has had many 1st gens that i have pulled things off of for my own truck. There isnt a very big after market for old dodge trucks which really sucks but just looking around on the internet doesnt hurt. I know a lot of people dont like ebay but ive seen many parts for our trucks on there. Just remember that anything from an 81' to 93' dodge truck or ramcharger will fit. If you need help finding parts let me know and i can search some yards. Not knowing where exactly in oregon you live i cant point you to anything specific. Ill send you a pm (private message) with a website that has a lot of diy things for first gens that can help fix your truck._________________ Prerunner build: 82 Ram D150 Custom, 225, 4 speed manual. 2.5" exhaust. Hei ignition. Partially blacked out. Many mods
 |
|
| Back to top |
|
Ckaczmarek 1 BBL (New)
Joined: 24 Feb 2012 Posts: 4 Location: Oregon
|
|
Post subject:
(Mon May 28, 2012 2:59 pm)
|
|
|
|
I'll come over whenever im invited over 
_________________ 82 D-150
|
|
| Back to top |
|
|