|
|
| Author |
Message |
justinb
4 BBL ''Hyper-Pak''
Joined: 12 Aug 2006
Posts: 36
Location: Fargo, ND
|
|
Post subject:
Early A Body fuel filler neck grommet.
(Wed Aug 18, 2010 1:18 pm)
|
 |
|
|
I can't seem to find anything about the proper fuel filler neck grommet for a 1960 Valiant. Anybody got a part number/source/dimensions? The local radiator/gas tank guy said Mopar used the same thing forever, but I haven't been able to find any information verifying that.
Justin._________________  |
|
| Back to top |
|
slantvaliant
Turbo EFI
Joined: 18 Feb 2003
Posts: 2233
Location: Lubbock, Texas
|
|
Post subject:
(Wed Aug 18, 2010 4:15 pm)
|
|
|
|
I tried one of the "problem solver" grommets sold on Ebay as fitting most Mopars from the 60's and 70's. It didn't come anywhere close to fitting my '64 Valiant. The seller did give my money back, and paid for shipping, too._________________ "When you find a big kettle of crazy, it's best not to stir it." - Pointy-haired Boss
1964 Valiant V200, 225/904 PB
BBS, CAI, HEI, LBP, AC, AM/FM/USB, EIEIO |
|
| Back to top |
|
Charrlie_S
SL6 Racer & Moderator
Joined: 19 Oct 2002
Posts: 6128
Location: Silver Springs, Fl.
|
|
Post subject:
(Wed Aug 18, 2010 5:52 pm)
|
|
|
|
If you mean the filler pipe to fuel tank gromet, try here.
http://www.quantaproducts.com/products.asp?dept=562&pagenumber=2&sor
Edit: OOOps, just realized you need for a 1960. I might have a new one for a 62, which is different then the 63. Can anyone say if the 60-62 are the same?
_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Cuda 170 nitrous
66 Valiant Signet 225 nitrous
64 Valiant Signet
64 Valiant 4dr 170
|
|
| Back to top |
|
ESP47
Turbo EFI
Joined: 11 Nov 2004
Posts: 1081
Location: Sacramento, CA
|
|
Post subject:
(Wed Aug 18, 2010 6:26 pm)
|
|
|
|
Dan would know..
|
|
| Back to top |
|
justinb
4 BBL ''Hyper-Pak''
Joined: 12 Aug 2006
Posts: 36
Location: Fargo, ND
|
|
Post subject:
(Tue Aug 31, 2010 8:11 pm)
|
|
|
|
Any input?_________________ |
|
| Back to top |
|
relic-lover
EFI Slant 6
Joined: 03 Jun 2003
Posts: 376
Location: San Diego, California
|
|
Post subject:
part number
(Mon Sep 06, 2010 2:57 pm)
|
|
|
|
It looks like a large o ring, nothing too special.
The 60 and 61 valiant parts books give the original part number as 2073938.
So 60 and 61 are the same, I can't say about 62 or 63 since I do not have those parts books._________________  |
|
| Back to top |
|
VDART
Turbo EFI
Joined: 25 Oct 2003
Posts: 1124
Location: wichita ks
|
|
Post subject:
(Mon Sep 06, 2010 3:25 pm)
|
|
|
|
| 62 also has a large "O" ring-- the tanks on the 60/61 are different than the 62-- different trunk structure. try Andy Bernbaum or go to a local rubber place & match it up, Lawrence
|
|
| Back to top |
|
Charrlie_S
SL6 Racer & Moderator
Joined: 19 Oct 2002
Posts: 6128
Location: Silver Springs, Fl.
|
|
Post subject:
(Mon Sep 06, 2010 4:21 pm)
|
|
|
|
This dealer shows as having the 2073938 in stock. I have bought from him, and he is reasonable, and reliable.
SILKE'S AUTO PARTS INC.
JACKSONVILLE, FL 32217
001 (904) 737-8600
This dealer also shows that part in stock. I have found him to be a little pricey.
COLLECTORS AUTO SUPPLY
OROVILLE, WA 98844
001 (800) 414-4462
_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Cuda 170 nitrous
66 Valiant Signet 225 nitrous
64 Valiant Signet
64 Valiant 4dr 170
|
|
| Back to top |
|
|
