Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Jun 25, 2022 7:18 pm

All times are UTC-07:00




Post new topic  Reply to topic  [ 1 post ] 
Author Message
PostPosted: Thu Apr 25, 2019 4:43 pm 
Offline
Supercharged

Joined: Wed Sep 17, 2008 6:48 pm
Posts: 3560
Location: Indianapolis
Car Model:
Front shoulder belts became mandatory for hardtop cars sold in the US that were build Jan 1 1968 and after.
What Chrysler appears to have done, at least with the 1968 Barracuda, was to have a shoulder belt option for early 68 cars built prior to January 1.
That means the shoulder harness bracket is present on all cars , but it was only when someone ordered the optional front shoulder harness that there was a nut welded to the
bracket to allow the harness to bolt up.

My 1968 Barracuda has a birth date of October 17 1967, and was built with out the optional shoulder harness. However I came across a posting at FABO, where another 68 Barracuda owner came up with a fairly good process to install a backstop to bolt a shoulder harness assembly to.

That is at the link below.

https://www.forabodiesonly.com/mopar/th ... da.375692/

I followed what was done previously but made some improvements in the process. From a gauge that simulated the install hardpoint I was able to develop an EZ process to locate and hold the backstop during installation. The gauge also was used as a template to mark on the car bracket the amount to open up the OE mount hole and to locate the set screw hole. I have posted photos below, but the detail is at the link.

This was a good find for me as I was able to get functional shoulder belt mounts without a tear up on the original and in fairly good shape headliner.


Attachments:
File comment: gauge used for prototyping the process and marking the location to drill the set screw hole in the car bracket
file-15.jpeg
file-15.jpeg [ 148.54 KiB | Viewed 4562 times ]
File comment: parts,, the puck is 1/4 inch thick, about .750 wide and 1.5 inches long
file-17.jpeg
file-17.jpeg [ 165.84 KiB | Viewed 4562 times ]
File comment: the backing puck with the string attached and the set screw started
file-16.jpeg
file-16.jpeg [ 45.89 KiB | Viewed 4562 times ]
File comment: shoulder harness bolt install complete
file1-6.jpeg
file1-6.jpeg [ 103.51 KiB | Viewed 4562 times ]

_________________
Doo Ron Ron and the Duke of Earl are friends of mine.....
https://www.youtube.com/watch?v=uX8Nj8ABEI8
Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 1 post ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited