Slant Six Forum
https://www.slantsix.org/forum/

Crank scrapers, windage tray
https://www.slantsix.org/forum/viewtopic.php?f=11&t=63319
Page 2 of 2

Author:  slantzilla [ Tue Feb 19, 2019 1:42 pm ]
Post subject:  Re: Crank scrapers, windage tray

I know Mike's scrapers were thin, the Johnson one is thicker. I seal mine to the block with black silicone and fill the ends in then. I use a gasket over that, then another thin coat of silicone before the pan goes on.

I could probably eliminate the gasket, but you do still need the end seals obviously. :D

Author:  drgonzo [ Tue Feb 19, 2019 1:58 pm ]
Post subject:  Re: Crank scrapers, windage tray

Alright!
Sealer only - 1 Yes and 1 Probably
Gasket & sealer - 1 Yes
:lol:

Author:  DadTruck [ Tue Feb 19, 2019 2:13 pm ]
Post subject:  Re: Crank scrapers, windage tray

Quote:
one side is bent at a 90 degree angle and what the hinged trap doors



photos are at his web page


https://www.crank-scrapers.com/Chrysler_slant_six.html

Page 2 of 2 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/