Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sun Jun 26, 2022 3:56 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Hood Clearance Survey
PostPosted: Thu Dec 16, 2021 5:42 am 
Offline
EFI Slant 6

Joined: Sat Mar 19, 2016 7:25 pm
Posts: 285
Location: SW PA
Car Model:
OK dedicated Slanters, I am requesting Your assistance in documenting the working room up top, from stock to whatever You have. I have posted this on FABO as well for those of You who are members there as well. I will post the form/order for responses. Please keep posts to data & info only. If there are related-detailed threads here, please post a link. Thx! K6


Top
   
PostPosted: Thu Dec 16, 2021 6:06 am 
Offline
EFI Slant 6

Joined: Sat Mar 19, 2016 7:25 pm
Posts: 285
Location: SW PA
Car Model:
A) Year/Model/K-frame(stk.-modded, sandwich-spool- plate etc.)/Tall or short block.
B) Brand/Mfr of Engine Mounts.
C) Type/Brand of Intake Manny(carb(s)-EFI/Aussiespeed-Gill Welding etc.).
D) OA Height of Carb(s)-TBI/Adapters/Spacers/NOS Plates etc., Base to Airhorn seat.
E) Height of Air Cleaner above Airhorn Base, Point(s) of closest proximity.
F) Minimum Hood Clearance Dimension.

Please indicate if head has been angle-milled or intake raised on head. Thx again!


Top
   
PostPosted: Thu Jan 06, 2022 5:11 pm 
Offline
EFI Slant 6

Joined: Sat Mar 19, 2016 7:25 pm
Posts: 285
Location: SW PA
Car Model:
A) '64/Dart GT 'vert/stk. K-sandwich/225
B) OE sandwich- avg.; Dr. 1.75", Pass 1.80"
C) OE iron 1bbl.
D) Carb.-OA ht. w/.140" Base gskt.- 4.10".
E) BBS 1bbl. Carter.
F) Factory 8.75"OD Air Cl.assy., 3.0" w/.125" airhorn gskt., Frt./Dr. frt. Hoodskin.
G) 1.00"


Top
   
PostPosted: Tue Jan 18, 2022 3:56 pm 
Offline
Turbo EFI
User avatar

Joined: Wed Nov 23, 2011 11:07 am
Posts: 2116
Location: SF Bay Area
Car Model: 67 dart 2 door hardtop
A) '67 Dart 2 dr hardtop/'73-76 spool type K-frame/225 cu. in.
B) OEM spool type
C) Offenhauser 4 bbl Intake/FiTech 4bbl EFI
D) 4 1/4" from base of manifold to airhorn seat (1/2" phenolic spacer/1/8" aluminum heat shield/gaskets).
E) 2 1/4" - Height of Air Cleaner above Airhorn Base
F) 1/4" - Minimum Hood Clearance Dimension.

Not angle-milled or intake raised on head

_________________
https://tinyurl.com/yynpj4v2


Top
   
PostPosted: Wed Feb 23, 2022 2:40 am 
Offline
EFI Slant 6

Joined: Sat Mar 19, 2016 7:25 pm
Posts: 285
Location: SW PA
Car Model:
A) '72 Duster w a/c, stk.-K sandwich, 225.
B) OE Sandwich, Dr. 1.25", Pass. 1.625".
C) OE 1bbl. Iron.
D) Carb. OA Ht w/.130" base gasket, 4.25".
E) Holley 1920.
F) Factory 11" OD Air cleaner, 11.75" OD Lid, 2.375" w/.125" Air horn gasket. Frt. edge near brace.
G) 1.625".
* Stud & Wingnut proud above lid 3/16".*


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited