Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sun Jun 26, 2022 4:56 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Clifford 225 parts
PostPosted: Sat Mar 19, 2022 2:36 pm 
Offline
3 Deuce Webber

Joined: Mon Feb 21, 2005 7:46 pm
Posts: 79
Location: Nothern Illinois.
Car Model:
are split shorty headers, 4 barrel intakes, and finned aluminum valve covers hard to get these days?

_________________
Too young to throw in the towel,
Too old to be in the ring!

1964 Plymouth Valiant 2 door sedan,
duece and a quarter slant six baby.
(All Mopar, all the time. Any questions)???


Top
   
 Post subject: Re: Clifford 225 parts
PostPosted: Sun Mar 20, 2022 10:51 am 
Offline
Turbo EFI
User avatar

Joined: Tue Nov 23, 2004 6:05 pm
Posts: 1169
Location: Desoto Texas
Car Model: 1972 Dodge Colt
I think they made a run of headers recently.
The Intake and cover I don't know.
Call Larry (Jack Clifford's son in law) and ask him.
I guess you were asking about new.

_________________
Hyper_pak


Top
   
 Post subject: Re: Clifford 225 parts
PostPosted: Sun Mar 20, 2022 1:18 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 13326
Location: Park Forest, Illinoisy
Car Model: 68 Valiant
Someone on the board recently received a new set of shorty headers. The 2X1 Y pipe is long discontinued.

In all honesty for the street I would use an Offy intake. It is somewhat more street oriented than the Clifford.

The Clifford valve cover is just an Offy that has had Clifford's name put on it. Buddy of mine bought a Clifford a few years ago and it took 8 months to get then.

All that stuff pops up used frequently. If you get on Facebook there are a couple Slant pages, and stuff is on there all the time. There was recently an intake carb, headers and valve cover in a pile of stuff up by Hampshire. Not sure if it ever sold or not.

_________________
Official Cookie and Mater Tormentor.


Top
   
 Post subject: Re: Clifford 225 parts
PostPosted: Mon Mar 28, 2022 6:12 am 
Offline
3 Deuce Webber

Joined: Mon Feb 21, 2005 7:46 pm
Posts: 79
Location: Nothern Illinois.
Car Model:
slantzilla wrote:
Someone on the board recently received a new set of shorty headers. The 2X1 Y pipe is long discontinued.

In all honesty for the street I would use an Offy intake. It is somewhat more street oriented than the Clifford.

The Clifford valve cover is just an Offy that has had Clifford's name put on it. Buddy of mine bought a Clifford a few years ago and it took 8 months to get then.

All that stuff pops up used frequently. If you get on Facebook there are a couple Slant pages, and stuff is on there all the time. There was recently an intake carb, headers and valve cover in a pile of stuff up by Hampshire. Not sure if it ever sold or not.


Could not find the sites on wastebook Denis, Ended up finding a nice a body, a 64 Valiant, clean, rust free, but has an issue starting after driving. just simply will not fire, like something like the coil is not hooked up but when it does restart its fine, has a fireball coil, electronic ignition, nd a bunch of cCifford stuff on the motor. one of the cleanest a bodies I have had in a long long time.

_________________
Too young to throw in the towel,
Too old to be in the ring!

1964 Plymouth Valiant 2 door sedan,
duece and a quarter slant six baby.
(All Mopar, all the time. Any questions)???


Top
   
 Post subject: Re: Clifford 225 parts
PostPosted: Mon Mar 28, 2022 6:42 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 13326
Location: Park Forest, Illinoisy
Car Model: 68 Valiant
Take the bulkhead connector apart and check for corrosion on the contacts, especially the blue wire to the ballast resistor/coil. :oops:

_________________
Official Cookie and Mater Tormentor.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited