Slant *       6       Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Mon May 13, 2024 1:15 pm

Unanswered topics | Active topics


» » »

All times are UTC-07:00



Post new topic  Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
86 w150 MT
PostPosted: Wed Apr 15, 2020 8:43 am 
Offline
1 BBL (New)

Joined: Wed Apr 15, 2020 5:26 am
Posts: 4
Car Model: dodge ram W150
Hello I have an 86 dodge w150 with a slant 6 4 speed I bought a doner 85 d100? Or d150 with the same engine will the bellhousing off of the 86 fit the 85 ?
Top
   
Reply with quote  
Joshie225
PostPosted: Wed Apr 15, 2020 4:55 pm 
Offline
Supercharged
User avatar

Joined: Thu Jan 27, 2005 8:32 pm
Posts: 7834
Location: Portland-ish
Car Model: Fiat 500e
The bellhousing is dependent upon the transmission used. If the 4x4 has the big transmission with the shifter in the top cover and the RWD truck has the smaller trans with the shifter on the side then they will use different bellhousings. If the RWD truck has the same trans as the 4x4 then the bell should also be the same.

_________________
Joshua
Top
   
Reply with quote  
86 w150 MT
PostPosted: Wed Apr 15, 2020 5:26 pm 
Offline
1 BBL (New)

Joined: Wed Apr 15, 2020 5:26 am
Posts: 4
Car Model: dodge ram W150
Well !$#@ I thought I could use my bellhousing off my 86.... What product do I need to get to make it work correctly?
Top
   
Reply with quote  
Joshie225
PostPosted: Wed Apr 15, 2020 7:18 pm 
Offline
Supercharged
User avatar

Joined: Thu Jan 27, 2005 8:32 pm
Posts: 7834
Location: Portland-ish
Car Model: Fiat 500e
I don't know what you're trying to do so let's start there.

_________________
Joshua
Top
   
Reply with quote  
86 w150 MT
PostPosted: Thu Apr 16, 2020 5:33 am 
Offline
1 BBL (New)

Joined: Wed Apr 15, 2020 5:26 am
Posts: 4
Car Model: dodge ram W150
Just trying to get my 86 going again by putting the engine from the 85 2wd into my 86 just having complications with the bellhousing at the moment.
Top
   
Reply with quote  
Joshie225
PostPosted: Thu Apr 16, 2020 8:53 am 
Offline
Supercharged
User avatar

Joined: Thu Jan 27, 2005 8:32 pm
Posts: 7834
Location: Portland-ish
Car Model: Fiat 500e
The engine will interchange fine. If the RWD truck has the A833OD and the 4x4 an NP435 you will not be able to swap any of the flywheel, clutch or bellhousing. You haven't said what transmission is in each truck so I've said about all I can.

_________________
Joshua
Top
   
Reply with quote  
86 w150 MT
PostPosted: Thu Apr 16, 2020 1:24 pm 
Offline
1 BBL (New)

Joined: Wed Apr 15, 2020 5:26 am
Posts: 4
Car Model: dodge ram W150
Yeah I dunno what it is either. Thanks man
Top
   
Reply with quote  
Rick Covalt
PostPosted: Thu Apr 16, 2020 4:59 pm 
Offline
Board Sponsor & SL6 Racer

Joined: Wed Oct 23, 2002 7:57 pm
Posts: 8363
Location: Waynesboro, Pa.
Car Model: 65 Valiant 2Dr Post
Is the shifter up through the middle of the floor and 3 feet long? Or does it come up along the left side of the hump and is 2 feet long? With chrome handle.

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!
Image
12.70 @ 104.6
Image
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 8 posts ] 

» » »

All times are UTC-07:00

Who is online

Users browsing this forum: No registered users and 28 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited