| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Robert DiBiase EFI https://www.slantsix.org/forum/viewtopic.php?f=26&t=63995 |
Page 3 of 3 |
| Author: | Joshie225 [ Fri Nov 08, 2019 12:45 pm ] |
| Post subject: | Re: Robert DiBiase EFI |
The Corvette is 25 years old and the MAF appears to stay pretty clean. To keep oil out of the MAF plumb the valve cover mounted PCV into the intake manifold as original (just after the throttle body) and plumb the crankcase fresh air close to the throttle body and after the MAF. The Corvette can mount the PCV to the intake manifold as the manifold seals the lifter valley and therefore has an opening into the crankcase. |
|
| Author: | BUCKET 636 [ Tue Nov 12, 2019 12:00 pm ] |
| Post subject: | Re: Robert DiBiase EFI |
More good info , thanks fellas . |
|
| Page 3 of 3 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|