My wiring at the switch end has frayed enough I had to take it off. While trying to get the wire out I mangled the spade a bit. All the similar sized spades from hardware stores I have tried do not fit. Is this a special connector or just a matter of tooling changes on new spades make them not fit?

I'll cobble something together that works but just curious if there is a correct part I can order somewhere.

Brandon

_________________
____________________________

https://www.flickr.com/photos/162600228@N03/

I have always just used a regular female spade terminal that I crimped/stretched to get a snug fit on the sending unit.

Thanks for the info. I'll just bend and crimp one till I get it to work.

Brandon

_________________
____________________________

https://www.flickr.com/photos/162600228@N03/

I think this housing will work on oil pressure switch.


This is the female terminal that fits the above plastic housing:


You can find the brass female terminal at any auto parts store.

_________________
67' Dart GT Convertible; the old Chrysler Corp.
82' LeBaron Convertible; the new Chrysler Corp
07' 300 C AWD; Now by Fiat, the old new Chrysler LLC

I bought a few of these:

Oil Switch Connector

They fit perfectly.

_________________
-MattMan
LEANED & MEAN