I used a G Force one:
Front view shows additional tow strap added.
They can be found Here
I bolted directly to the front bumper mount.
What you propose probably works if you have the fiberglass bumper installed in place of the OE bumper.
Greg
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Tow Hook https://www.slantsix.org/forum/viewtopic.php?f=42&t=66537 |
Page 1 of 1 |
| Author: | DadTruck [ Wed Apr 06, 2022 9:31 am ] |
| Post subject: | Tow Hook |
Since I have the front grill work and bumper off the 68 Barracuda, I think I want to add a front tow hook. The front bumper is fiberglass with lightweight aluminum bumper mounts, and the front spoiler would really limit access to the k frame. I am thinking of a simple 3/8 inch thick steel L bracket that would bolt to the passenger side sub frame where the bumper mount is, with the L forward and below the bumper with an eye on it for attaching a pull cable hook. Sound reasonable? Any other ideas? |
|
| Author: | Greg Ondayko [ Wed Apr 06, 2022 11:00 am ] |
| Post subject: | Re: Tow Hook |
I used a G Force one: Front view shows additional tow strap added. They can be found Here I bolted directly to the front bumper mount. What you propose probably works if you have the fiberglass bumper installed in place of the OE bumper. Greg |
|
| Author: | DadTruck [ Thu Apr 14, 2022 4:54 pm ] | |||
| Post subject: | Re: Tow Hook | |||
The tow hook is made and mounted. Weighed in at 3.8 lbs I would have liked to use a strap like Greg did, but I needed it to get below the front bumper so in use the pull cable would not put pressure on the fiberglass bumper.
|
||||
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|