Who can interpret cam specs?

Unanswered topics | Active topics

Home » Board index » Tech Q & A » Engine

All times are UTC-08:00

Who can interpret cam specs?

Post new topic Reply to topic

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

olddaddy

Post subject: Who can interpret cam specs?

PostPosted: Fri Aug 04, 2006 2:39 pm

Offline

4 BBL ''Hyper-Pak''

Joined: Sun May 02, 2004 7:48 am
Posts: 30
Location: Davenport, FL
Car Model:

I found a cam and tappet set, can one of you engine guys interpret what this cam will be like in my engine? Mopar Performance cam and tappett package,part # P4529340 . Specs on the box: Mild competition,Hydraulic lift.398 ; Overlap 24 ; Duration 240 ; Centerline 106 My car is a mild daily driver, 2bbl carb/super six setup, single exhaust.

_________________
Life is good!

Top

Profile

Reply with quote

Dart270

Post subject:

PostPosted: Fri Aug 04, 2006 8:42 pm

Offline

Board Sponsor & Moderator

Joined: Mon Oct 21, 2002 11:08 am
Posts: 17201
Location: Blacksburg, VA
Car Model:

That cam is essentially stock and will work fine with your car and engine combo. If you have a solid-lifter engine, you will need some mods (like an 80-up head) to run the hydro cam. Personally, I wouldn't bother.

Lou

_________________
Home of Slant6-powered fun machines since 1988