Is there any good method to steaming the foam from car seats? How long does it hold its original form afterward? I ask because I'm installing the original buckets from my truck (okay it's my Toyota, but I figured you guys would my best bet for tips on restoration) and I can't get new foam for the seat backs, so I'm stuck trying to restore the original stuff.

_________________
'74 Duster w/ HEI ignition, beat to snot suspension, A904, 8.25" 3.55 SG rear, still being tuned up and gets 17 MPG

Know how they always build a better idiot? That's me

Jopapa,I'm not getting the big picture here.My wife and I used to dabbel in interior work and I could use a bit more info plz.

_________________
83 B-150 slant 6,4 speed. 79 B-300 360 pathfinder 4x4. 74 W-300 318 4x4 git-r-done 80 B-100 sl6,4speed

I had read in the past that if seat foam is still in reasonable shape (not torn up or anything like that), it can be gone over with a vapor steam cleaner to help restore the original shape. Unfortunately, that's all I know as well. I was hoping some of the guys here might know more about it so they can offer me some pointers so I don't screw anything up.

_________________
'74 Duster w/ HEI ignition, beat to snot suspension, A904, 8.25" 3.55 SG rear, still being tuned up and gets 17 MPG

Know how they always build a better idiot? That's me

A friend of mine has been doing custom and resto interiors for 40yrs and while I've never seen him do this steaming thing he'll know.I'll stop by his shop this am and see whats up,'sides I got to check out what he's working on anyway

_________________
83 B-150 slant 6,4 speed. 79 B-300 360 pathfinder 4x4. 74 W-300 318 4x4 git-r-done 80 B-100 sl6,4speed

Here's the deal,steaming the foam will expand it back to orginal shape,maybe.As far as how much steam and how long it's a trial and error thing.My friend says it won't last very long it's more of a poof it up so it looks ok as it's sitting there on the used car lot.Once the cells in the foam are "flat"they cann't really be "pumped up"again.I can give you some tricks on redoing it if you want.Sorry

_________________
83 B-150 slant 6,4 speed. 79 B-300 360 pathfinder 4x4. 74 W-300 318 4x4 git-r-done 80 B-100 sl6,4speed

Tips for actually restoring the foam, or making a new foam seat back?

_________________
'74 Duster w/ HEI ignition, beat to snot suspension, A904, 8.25" 3.55 SG rear, still being tuned up and gets 17 MPG

Know how they always build a better idiot? That's me

Tips for alittle of each I guess.Adding some new foam on top of old to build it back up and make it last.

_________________
83 B-150 slant 6,4 speed. 79 B-300 360 pathfinder 4x4. 74 W-300 318 4x4 git-r-done 80 B-100 sl6,4speed

Sounds good to me! My ears are open and I'm listening

_________________
'74 Duster w/ HEI ignition, beat to snot suspension, A904, 8.25" 3.55 SG rear, still being tuned up and gets 17 MPG

Know how they always build a better idiot? That's me

How bout you pm with your phone# and a good time to get hold of you,no since takin up forum space.I've got one of those phone plans where it don't cost me to make long distance calls

_________________
83 B-150 slant 6,4 speed. 79 B-300 360 pathfinder 4x4. 74 W-300 318 4x4 git-r-done 80 B-100 sl6,4speed