Can anyone please tell me the diameter and spline count on a 61 Valiant manual Saginaw steering box? I know its smaller than the 62 up stuff. Thanks in advance.

_________________
1960 Hyper-Pac Valiant(rolling test-bed)
1963 Valiant V2OO(Son's summer project,- he just turned 15 )
1972 Valiant 4dr(Daughter Kelly's repair in progress)
1974 Valiant (v8) daughter Kelly's work in progress

I Bet Slantsixdan Knows.

maybe this can help somewhat it the meantime...
https://www.rockauto.com/en/catalog/ply ... +gear,7416




Greg

_________________
http://www.youtube.com/hyperpack

Sorry, I know naah-theenk. But I bet Michael knows.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Aww shucks.. just when you thought ssd knew mostly everything there is to know about the early valiants/lancers..

I don't know who Michael is.

_________________
http://www.youtube.com/hyperpack

Still thinkin' about that 62-up K-frame install, Mark? Bet I could help set you up with some parts...

Need to take you for a ride in my 62 now (OK in a month or 2 or 3). Handling is much improved and no more misfire!

Lou

_________________
Home of Slant6-powered fun machines

Thanks everyone. Lou, i think im staying with my current setup. I've got lower control arm bushings on the way. Btw thanks for the heads up on Rare Parts,got both bushings for $120 shipped. Everything else in the front looks great except the steering box coupling.
What we need to do is meet in Wythville some Saturday morning and ride across the mountains into Marion then we can ride down to our new place in Chilhowie.
HyperValiant

_________________
1960 Hyper-Pac Valiant(rolling test-bed)

1963 Valiant V2OO(Son's summer project,- he just turned 15 )

1972 Valiant 4dr(Daughter Kelly's repair in progress)

1974 Valiant (v8) daughter Kelly's work in progress

If I can make it, I would be up for that meetup! sounds fantastic!

Greg

_________________
http://www.youtube.com/hyperpack

Mark,

is your epic wythville - marion route from 52 north, then 42,614,61 ,or 460 west to tazwell then 16 to marion?

Definitely need the correct steering box for that!

Greg

_________________
http://www.youtube.com/hyperpack

This guy.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Does this use a rag joint like GM and Ford ?

_________________
63 Plymouth Valiant Wagon

Mark, I'm game! Let's keep up by phone about this. More elbow grease on the 64 engine bay the last few days - almost done. 62 is ready to rock whenever...

Best, Lou

_________________
Home of Slant6-powered fun machines

Ok, I may have found a solution for the shoes and tension spring for the coupling. I will report back whether it goes good or bad.
Hypervaliant

_________________
1960 Hyper-Pac Valiant(rolling test-bed)

1963 Valiant V2OO(Son's summer project,- he just turned 15 )

1972 Valiant 4dr(Daughter Kelly's repair in progress)

1974 Valiant (v8) daughter Kelly's work in progress

Lou, the bushings came today and they look good. Going to pull the column very soon. I've got a plan , just need to pull it together, lol. I'll be in touch for sure.
Mark

_________________
1960 Hyper-Pac Valiant(rolling test-bed)

1963 Valiant V2OO(Son's summer project,- he just turned 15 )

1972 Valiant 4dr(Daughter Kelly's repair in progress)

1974 Valiant (v8) daughter Kelly's work in progress

Thanks Dan, Stan, Brian, Lou,Mark.

Lotsa cool stuff to learn about the 60 and 61 cars!

Greg

_________________
http://www.youtube.com/hyperpack

Didn't know I still had access here - thanks Daniel!

The 60-61 box has 32 splines just like the later 62-72 units. The pitman is a tapered fit as well but is just under 1" in diameter, where the later one is just over 1". I just measured them! Hope that helps.

_________________
. . . there was good sport at his making.