Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Tue Nov 03, 2026 2:41 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Sat Oct 10, 2026 5:17 pm 
Offline
1 BBL (New)

Joined: Fri Oct 09, 2026 12:33 pm
Posts: 2
Location: North Hollywood - LA
Car Model: 1975 Plymouth Scamp
Hey there folks! I'm located in North Hollywood, CA and am looking for a 225 head that's been rebuilt or is known good- that someone would like to donate to the cause or sell cheap (like $50 max). I'm on a shoestring budget here, and am hoping one of you lovely /6 fans has an abandoned one laying around I could pickup! I did see one in Ventura FB marketplace that fits this description, but the seller hasn't gotten back to me since I messaged him mid week- if that's one of you, please let me know.

I bought my first mopar, a '75 Scamp (with a '70 225) about a month ago and have been working through it's list of issues. It has not started in at least a few years, and has not been registered for 7 (2019). After lashing the valves (half of the rocker arms had zero lash) and pre-lubricating the cylinders the compression in the head is (front to back) 70-70-90-90-60-70. So pretty darn poor. After this discovery last weekend, myself, an ex-machinist mopar buddy, and his aviation mech. friend, all gave a serious effort to get it started anyway, and we got quite close, but did not succeed. * That lack of success also ended with me needing another functional starter *

Anyway, I took the head off yesterday: 10 valves leak quite badly, and 2 leak less, a few are burnt, and the head gasket looks like it was leaking in at least 2 spots. I think it got quite warm in there at some point. This is all to say, if any of you have a head that fits this description (and/or a starter) please do let me know! Otherwise, maybe I'll see some of you at the CPW Fall Fling Swap Meet next weekend perusing the /6 parts.

Thanks for reading,
Zane


Attachments:
CE2E9856-E93C-4086-8D7D-6F223367A7CE.JPG
CE2E9856-E93C-4086-8D7D-6F223367A7CE.JPG [ 68.22 KiB | Viewed 410 times ]


Last edited by Zane on Tue Oct 20, 2026 1:56 pm, edited 1 time in total.
Top
   
PostPosted: Sat Oct 10, 2026 6:59 pm 
Offline
Supercharged
User avatar

Joined: Wed Oct 12, 2005 9:00 pm
Posts: 3297
Location: kankakee IL
Car Model: 80 volare, 78 fury 2 dr, 85 D150
There's a guy on FABO (I believe it's user "junkyard hero") offering a /6 for free over there but I believe you have to take the whole engine. He's somewhere in California... If I remember Ventura maybe?
I have a fresh ready to run head here but I'm in IL. and have more tied up into it than you're suggesting. I have a bare head I could offer for free but shipping would cost more than your $50. Look around. They're out there.


Top
   
PostPosted: Sat Oct 10, 2026 8:41 pm 
Offline
1 BBL (New)

Joined: Fri Oct 09, 2026 12:33 pm
Posts: 2
Location: North Hollywood - LA
Car Model: 1975 Plymouth Scamp
Thanks for the offer and the potential lead volaredon. Unfortunately, I'm not seeing junkyardhero's slant posting that you're mentioning. If you see it again and are able to link it, that would be terrific, his account is indeed, LA based, and he has a killer brown dart wagon which I envy.

However, if you're thinking of kerndog's post, then that is indeed a whole free slant but sadly it's at the other end of California outside of Sacramento (about 7 hours away) and he doesn't know if it runs. I'll keep looking around my area for now. Thank you again for the reply.


Top
   
PostPosted: Sun Oct 11, 2026 4:41 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 17660
Location: Blacksburg, VA
Car Model:
With that compression, it should have started. Likely you have other troubles too. Check for a skipped/loose timing chain, ignition timing, carb/fuel. I imagine you checked the timing and fuel already...

Lou

_________________
Home of Slant6-powered fun machines since 1988


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited