| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Where do I install mech. temp. gauge? https://www.slantsix.org/forum/viewtopic.php?t=12876 |
Page 2 of 2 |
| Author: | KBB_of_TMC [ Thu Sep 09, 2010 9:44 am ] |
| Post subject: | |
I put a 2" Sunpro mech temp gauge from Pep Boys, and shortly afterward the needle started binding up and sticking - I'd have to tap the gauge to free it. After some argument with the counter guy at PB (he insisted that I must have damaged the tube to the sender somehow, although there was no visible damage), I was given another one that has worked just fine for some years in a daily driver and seems quite accurate. I'd suggest you test any mech gauge before you go through the trouble to install it. |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|