| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 2/4-650cfm https://www.slantsix.org/forum/viewtopic.php?t=14604 |
Page 2 of 2 |
| Author: | terrylittlejohn [ Tue Oct 04, 2005 6:07 pm ] |
| Post subject: | 2/4-650cfm |
thanks for the imput i well try the 750 for next season |
|
| Author: | terrylittlejohn [ Wed Oct 19, 2005 4:19 pm ] |
| Post subject: | 2/4-650cfm |
hi just an up date, found formula for cfm/boost:{(CIDxRPM)divide3456}x{boost divide 14.7)+1=CFM required. at 6500rpm & 10bls of boost it works out to 742cfm thanks for the help. |
|
| Author: | Dart270 [ Wed Oct 19, 2005 6:56 pm ] |
| Post subject: | |
Wow, didn't know my wild-ass guess would be that close to some estimate formula! Hope that works out, Terry. I'd love to meet you in person sometime and see your car run! Ya never know... I'm about to try a set of triple 40mm Webers on a Clifford intake. Should be an adventure. Lou |
|
| Author: | terrylittlejohn [ Thu Oct 20, 2005 6:04 am ] |
| Post subject: | 2/4-650cfm |
i have been trying to plan a trip, i have my own car trailer now and a good dakota, now all i need is the financing for the 1600 mile trip to ohio from this rock. |
|
| Author: | Dart270 [ Thu Oct 20, 2005 6:06 am ] |
| Post subject: | |
Good luck on the trip planning. I'll make a point to show up to that race! Lou |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|