| Slant Six Forum https://www.slantsix.org/forum/ |
|
| compression ratio calculators https://www.slantsix.org/forum/viewtopic.php?t=22942 |
Page 2 of 2 |
| Author: | slantfin [ Sat May 19, 2007 3:08 pm ] |
| Post subject: | fabled land of 110 |
What state is that 1969ronnie ? My cars are asking if we can move there. |
|
| Author: | Doc [ Mon May 21, 2007 10:16 am ] |
| Post subject: | |
There is no reason to use a domed piston in a 225 SL6. Note: The domed pistons in the H-Pak kit were designed for the "zero deck" 170 and just happened to also fit into a 225, so they were used there. Honestly, today's 'hot combo" for a high performance / high compression tall block SL6 is based on around the 198 con rod and 2.2 piston design. (long rod engine) In general, a 225 SL6 with a deck height in the -.045 to -.020 range will get you over 10 to 1 compression with an unmilled cylinder head. DD |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|