I was wondering the same thing Rick. Looks like they dump right where the steering would be.
Hooker used to make a set of truck headers that looked similar to that too.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Doug Thorley Headers on eBay https://www.slantsix.org/forum/viewtopic.php?t=31027 |
Page 2 of 2 |
| Author: | Rick Covalt [ Thu Sep 11, 2008 6:21 pm ] |
| Post subject: | Truck? |
I saw a set of these used some time ago. And I'm almost sure they were listed for a truck? I don''t see how they are going to fit any of our A-Bodies? But I may be wrong. It wouldn't be the first time. Rick |
|
| Author: | slantzilla [ Thu Sep 11, 2008 7:25 pm ] |
| Post subject: | |
I was wondering the same thing Rick. Looks like they dump right where the steering would be. Hooker used to make a set of truck headers that looked similar to that too.
|
|
| Author: | 62Signet [ Thu Sep 11, 2008 7:32 pm ] |
| Post subject: | |
price is really hard to judge on ebay imo; when you see something that just doesn't come up too much, people are always willing to pay 'just a little more' then they originally wanted.... I've done that m'self, hehe |
|
| Author: | slantzilla [ Fri Sep 19, 2008 7:12 am ] |
| Post subject: | |
They went for $375ish. No, it was not me. Lou, did you get them? |
|
| Author: | Dart270 [ Fri Sep 19, 2008 7:47 am ] |
| Post subject: | |
Nope. I was convinced they would go well over $400, so I didn't rebid after $270 initial. Maybe coulda swung it, but oh well... What does it cost to get a custom set made, anyway?? Lou |
|
| Author: | sandy in BC [ Fri Sep 19, 2008 8:18 am ] |
| Post subject: | |
If you send the money today ...Harold will do you a set for $200....no measuring necessary.... |
|
| Author: | slantzilla [ Fri Sep 19, 2008 8:57 am ] |
| Post subject: | |
Quote: If you send the money today ...Harold will do you a set for $200....no measuring necessary....
Spit out the Kool-Aid Canuk boy. That's not really red ale.  Fu$& Harold and his POS headers.  Lou, I got a set of the mild steel flanges coming from the guy on the Bag. My buddy has a set of 3 tube collectors already. We will be using 1-5/8" tube, and I think I'd like the primaries about 24" long or so. I'll be able to tell more after he gets mine done. I know the fancy set of nitrous headers Mike had done were over a grand. Plus coating.
|
|
| Author: | SlantSixDan [ Fri Sep 19, 2008 10:46 am ] |
| Post subject: | |
Geeze, you guys must have manure for brains or something. For that same money, you coulda hadda PowerPipe!  
|
|
| Author: | Shaker223 [ Fri Sep 19, 2008 12:19 pm ] |
| Post subject: | |
Quote:
Spit out the Kool-Aid Canuk boy. That's not really red ale.
Now that's funny!!
|
|
| Author: | Shaker223 [ Fri Sep 19, 2008 12:23 pm ] |
| Post subject: | |
Quote: Geeze, you guys must have manure for brains or something. For that same money, you coulda hadda PowerPipe!
I offerred to do a test on my car (turbo application) since I had a base HP & TQ # from the chassis dyno. He never followed thru. My offer was send me the pipe at cost and I pay for the Chassis dyno and he could use the info....As you probably guessed...it never happened.
|
|
| Author: | slantzilla [ Fri Sep 19, 2008 7:24 pm ] |
| Post subject: | |
Quote: Geeze, you guys must have manure for brains or something. For that same money, you coulda hadda PowerPipe!
You are right Dan. I should call and get one for the Daytona instead of wasting money having headers built. It would probably be so fast I wouldn't have to spray it anymore. 
|
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|