BigBlock....,
Thanks for the setup specs. It should work well on the Weiand manifold.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 500 or 600 Edelbrock? https://www.slantsix.org/forum/viewtopic.php?t=31208 |
Page 2 of 2 |
| Author: | BigBlockBanjo [ Mon Sep 22, 2008 12:31 pm ] |
| Post subject: | |
I second the vote for the tuning kit (#1486, I think) It is worth it's weight in gold. I did have to buy a set of rods off Ebag (70x52).....that's what I'm running now. 70x52 rod+yellow spring+.086 primary jet. Secondaries are currently .089....but I think it's a little rich. Yeah.....primaries measure the same......but they are "smaller" due to the large booster. Cheap, but effective... |
|
| Author: | Rug_Trucker [ Mon Sep 22, 2008 5:46 pm ] |
| Post subject: | |
A 375HP 440 AVS would be closer to 750cfm. The lowpo 350HP had a smaller carb. I think I have seen 450 AFB's that Carter used to make. Memory is fuzzy as I never needed a tiny 4bbl like that. |
|
| Author: | Aggressive Ted [ Thu Sep 25, 2008 4:14 pm ] |
| Post subject: | |
BigBlock...., Thanks for the setup specs. It should work well on the Weiand manifold.
|
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|