Slant Six Forum
https://www.slantsix.org/forum/

Guzzi car
https://www.slantsix.org/forum/viewtopic.php?t=31531		 Page 2 of 2
Author:  slantzilla [ Wed Oct 08, 2008 11:10 am ]
Post subject: 
Quote:
110 deg sounds very retarded to me - do you mean 100?

After my recent cam experiences, I wouldn't dream of installing anything at over 104 deg, and 100 seems about right. That engine needs more top end, so I recommended 104 for Mark.

A bit confused...
:?
Lou
At 110* it should have a ton of top end and be a pig down low. :?
Author:  Dart270 [ Wed Oct 08, 2008 2:15 pm ]
Post subject: 
OK, if Mark is at 101 now, then he won't gain too much by going to 104-105, but will a little. Maybe there are other problems besides the cam...

Lou
Author:  Doc [ Wed Oct 08, 2008 2:48 pm ]
Post subject: 
The car actually runs pretty good now... he wants MORE POWER!! :twisted:

We knew the cam was a little "light" for what he was planning but it was the hottest of the cams he had.

When we first got started on the Guzzi project, any running engine was a big step forward for the car... so we put an engine together with the best parts he had on hand.

One year later... the car is now better then the engine we built for it... I keep telling Mark that it's "the right problem to have".... and run it! :lol: :wink:
DD
Author:  madmax/6 [ Wed Oct 08, 2008 9:08 pm ]
Post subject: 
I just am not able to just run it,as is,I want and need MORE,just the way I am,will be in Redding with over 200rwhp if all goes well,will be there regaurdless,mark
Author:  slantzilla [ Thu Oct 09, 2008 6:00 am ]
Post subject: 
Spray it. :lol:
Author:  madmax/6 [ Thu Oct 09, 2008 9:34 pm ]
Post subject: 
I will spray it with atf before I run it,gives it a nice sheen,I gotta do it on all motor,I dont like the spray ever since I tried out running the cops on a bike with it,cost me a year,I found out spraying does not out run radios,all in my younger years,will tell the story in redding.
Re-camming guzzi motor,hopeing for 14,s.mark
Page 2 of 2 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/