| Slant Six Forum https://www.slantsix.org/forum/ |
|
| need timing chain part numbers https://www.slantsix.org/forum/viewtopic.php?t=36749 |
Page 2 of 2 |
| Author: | Charrlie_S [ Fri Aug 21, 2009 4:38 pm ] |
| Post subject: | |
Bob, we are talking about a double roller timing set. Tese are considered heavy duty/performance parts. They were used on some of the heavy duty truck engines from the factory. The "silent" link belt style chains you are refering to, are still inexpensive. About $30 for the chain and sprocket set, at Advance auto parts. |
|
| Author: | Charrlie_S [ Thu Sep 03, 2009 8:15 am ] |
| Post subject: | |
I recieved my crank sprockets and chains, from Summit, today. I now have 3 complete Cloyes double roller sets, and 1 Hughs (Avon) set. Did anyone else order? |
|
| Author: | mopardemon71 [ Thu Sep 03, 2009 9:34 pm ] |
| Post subject: | |
sell me one Charrlie !!!!!!!!!!!! |
|
| Author: | SurfRodder [ Mon Oct 05, 2009 6:47 pm ] |
| Post subject: | |
I did a little research and I know you guys that posted the info about these probably already know this, but here it is for everyone else: Double Roller Timing set components: Cam Sprocket: 1964-1970 Dodge A100 truck w/slant 6 225 (50 teeth) Cloyes p/n: S338 AE Clevite p/n: S338 Crank Sprocket: 1967-1978 Chrysler Big Block 383/426/440 (25 teeth) Cloyes p/n: S339 AE CLevite p/n: S339 Sealed Power p/n: 223339 Timing Chain: 1969-1982 Chevy Truck 454 Cloyes p/n: C168 AE Clevite p/n: 9168 Sealed Power p/n: 222168 Interestingly, all the manufacturers use essentially the same p/n's. Anyway, hope this save someone some time in the future, my engine builder cannot get cloyes from local distributors anymore but he says he can get Clevite w/o issue. I'm on a short time schedule so I cannot wait for Summit/Jegs. |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|