super six manifold and carb mounting needs linkage i dont have.. dont see to many issues with the 64 exhaust manifold to super six intake manifold.. I do have a spare 318 two-barrel that could be worked with tho
just worried about the $$
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Modifying Single barrel manifold to Two barrel? https://www.slantsix.org/forum/viewtopic.php?t=37809 |
Page 2 of 2 |
| Author: | Charrlie_S [ Fri Nov 06, 2009 4:51 am ] |
| Post subject: | |
Quote: Did you mount the carb parallel or perpendicular? .
I mounted the carb parallel to the engine. If this thread is still alive, next week. I will remove the carb and take a picture of the manifold. Can't see much with the carb in place. Then I will have to e-mail the pic to someone to post it.PS: I have been running this manifold and carb since 1979. Added the nitrous nozzles in 2001 or 2002. |
|
| Author: | carpdar [ Fri Nov 06, 2009 2:55 pm ] |
| Post subject: | |
The hard part for me is going to be keeping the stock look.. I wanted to apply for a collector's insurance policy on my valiant and they look at pictures of everything on the car.. I should be able to get away with it if i can retain the stock linkage to my BBS, but its going to come down to which way the carb sits.. looking foward to how Charrlie_S mounted his :p |
|
| Author: | hantayo13 [ Fri Nov 06, 2009 3:17 pm ] |
| Post subject: | |
just put a stock super six setup on ...then it is all stock |
|
| Author: | carpdar [ Sat Nov 07, 2009 4:37 am ] |
| Post subject: | |
super six manifold and carb mounting needs linkage i dont have.. dont see to many issues with the 64 exhaust manifold to super six intake manifold.. I do have a spare 318 two-barrel that could be worked with tho just worried about the $$ |
|
| Author: | hantayo13 [ Sat Nov 07, 2009 6:14 am ] |
| Post subject: | |
go to local scrapyard be cheaper to get linkage then to mod a one bbl to two bbl and you still need linkage....or post in parts wanted keep on roddin' |
|
| Author: | carpdar [ Sat Nov 07, 2009 12:43 pm ] |
| Post subject: | |
Oh trust me I've been around a few yards and the slant stuff is hardly existent.. The only useful thing i've found is a head and intake manifold i could get for cheap. Its going to get pretty brutal out here soon with winter driving coming in a few weeks.. so im thinking about rebuilding and tuning my BBS for reliability's sake. In the mean while I'm going to go back to pick and pull and get the head and intake manifold i found :p I'll make a side project out of it until i can get my car in a heated garage hehe. |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|