| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Master cylinder bore with power single-piston discs? https://www.slantsix.org/forum/viewtopic.php?t=37873 |
Page 2 of 2 |
| Author: | sandy in BC [ Sun Dec 06, 2009 9:10 am ] |
| Post subject: | |
I have tried an adjustable prop valve a number of times and found it to be redundant if your setup is correct. I find it useful as a diagnostic tool and as a bleeding aid. I agree that they are so cheap that its worth a try. In the Valiant I ended up using Stock 75 A body discs of the front and 99 Explorer rear discs. The weight , size and usage of both the 75 Dart and 99 Explorer were similar enough that it was no surprise when my stock 75 MC/prop valve was optimal. I had the adjustable prop valve on for a day just to see. I ended in the wide open position...... It stops on par with the wifes Eagle Talon. |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|