That's super fast Mark!!!
Glad the new motor worked out. Still taking notes Don
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| New motor,good news,bad news https://www.slantsix.org/forum/viewtopic.php?t=39372 |
Page 2 of 3 |
| Author: | Rick Covalt [ Fri Mar 12, 2010 10:41 am ] |
| Post subject: | Ssrn |
This would be a good article for the SSRN. Rick |
|
| Author: | Mister Twister [ Fri Mar 12, 2010 12:29 pm ] |
| Post subject: | |
That's super fast Mark!!! Glad the new motor worked out. Still taking notes Don
|
|
| Author: | wvenable [ Fri Mar 12, 2010 2:09 pm ] |
| Post subject: | |
So ya bent a few valves. Big damn deal. Told ya you would get er done.  This WOULD make a good article for SSRN. Mark, when my baby is ready to go together can I fly you in to tune her! 
|
|
| Author: | turbo66valiant [ Fri Mar 12, 2010 5:04 pm ] |
| Post subject: | |
WOWZER!! Good job Mark. Later Ryan |
|
| Author: | darrt wells [ Fri Mar 12, 2010 5:32 pm ] |
| Post subject: | |
GREAT job! I second shakers idea
|
|
| Author: | wicked/six [ Sat Mar 13, 2010 12:50 am ] |
| Post subject: | |
| Wow you almost skipped right passed the sevens into the sixes! Thats nutts Mark congrats. TF |
|
| Author: | Kidd [ Sun Mar 14, 2010 9:17 am ] |
| Post subject: | |
Mark.......proud of you man!! congrats. Andrew |
|
| Author: | sandy in BC [ Sun Mar 14, 2010 11:13 am ] |
| Post subject: | |
Cage by MATS? Good work man! Solid approach. |
|
| Author: | Big T [ Sun Mar 14, 2010 1:41 pm ] |
| Post subject: | New Motor |
AWESOME>>>> |
|
| Author: | madmax/6 [ Sun Mar 14, 2010 10:28 pm ] |
| Post subject: | |
I will bee able to run Vegas without cage.I cant go back to my local track without one.I will buy the material and fit it all up,will have to pay for welding cause I cant weld chromoly,and I just dont have the funds right now.Welder doest take credit cards.Guzzi Mark |
|
| Author: | Joshie225 [ Mon Mar 15, 2010 12:24 am ] |
| Post subject: | |
Chrome moly doesn't save that much weight over mild steel, but you are kinda fanatical about this issue so I'm not gonna give you any grief.  I look forward to seeing you. Hope you can make Medford otherwise I'll have to drive to Redding.
|
|
| Author: | madmax/6 [ Wed Mar 17, 2010 10:03 pm ] |
| Post subject: | |
Roll bar kinda in.mocking it up for final welding.should bee in for Vegas,will add about 50lbs.Got seat belts and Jacket today.Pulled carpet that weighted 16 lbs,removed snubber 2 lbs,rear door panels 5lbs.My guess on final weight with me in it,195 lbs is 2471.I will take Slantzilla with me to the scales for verifacation,Excited Nervous.Dont really have gear and tire for the 1/4.Guzzi Mark |
|
| Author: | Fopar [ Wed Mar 17, 2010 10:43 pm ] |
| Post subject: | |
The tires you were asking about should work, hope you will be glad you put the roll bar in (that you will run fast enough to need it). What snubber did you pull out? |
|
| Author: | Joshie225 [ Wed Mar 17, 2010 11:32 pm ] |
| Post subject: | |
Mark, You're getting to the point with that car I see a lightened or custom K-member and lower control arms in the car's future. Maybe even a strut front end and R&P steering. |
|
| Author: | Dart270 [ Thu Mar 18, 2010 5:27 am ] |
| Post subject: | |
I would get some taller tires to run the 1/4. Don't blow your motor... Lou |
|
| Page 2 of 3 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|