| Slant Six Forum https://www.slantsix.org/forum/ |
|
| acid dip and rust removal on hyper-pak bh block https://www.slantsix.org/forum/viewtopic.php?t=40838 |
Page 2 of 4 |
| Author: | 1969ronnie [ Thu Jul 29, 2010 12:45 pm ] |
| Post subject: | cylinder head |
|
|
|
| Author: | 1969ronnie [ Thu Jul 29, 2010 7:39 pm ] |
| Post subject: | cylinder head |
 
|
|
| Author: | slantsixbob [ Thu Jul 29, 2010 7:46 pm ] |
| Post subject: | |
i really like how clean it came out. how did you go about drying it? drip dry? heat gun/heater? also as far as the ratio goes for 1 - 1 is that pure zep or zep with something else? also where can i get the rust remover you used ? |
|
| Author: | Greg Ondayko [ Thu Jul 29, 2010 9:45 pm ] |
| Post subject: | |
Nice Ronnie. Greg |
|
| Author: | 1969ronnie [ Sat Jul 31, 2010 7:32 pm ] |
| Post subject: | drop off at machine shop..... |
|
|
| Author: | 1969ronnie [ Wed Aug 04, 2010 7:45 am ] |
| Post subject: | 50 cc heads |
 
|
|
| Author: | 1969ronnie [ Wed Aug 04, 2010 7:47 am ] |
| Post subject: | 50 cc heads |
 
|
|
| Author: | 1969ronnie [ Wed Aug 04, 2010 7:48 am ] |
| Post subject: | 50 cc heads |
 
|
|
| Author: | 1969ronnie [ Wed Aug 04, 2010 8:09 am ] |
| Post subject: | |
bob, in the pic with the power wagon , i let the parts drip into the drum and use the air hose to blow out any holes and quickly go over the entire part. the zep only eats rust and has other chemicals mixed into it. order it from a zep salesman. the 40 cc head is on the left in the pic with machinist. the 60 cc head is on the right,now 50cc. i also had intake and thermostat face machined to true and get rid of pits and sins. |
|
| Author: | 1969ronnie [ Wed Aug 04, 2010 9:07 am ] |
| Post subject: | |
the tops of the guides have not been cut down and the bowls are not bowl hogged yet . |
|
| Author: | Dart270 [ Wed Aug 04, 2010 10:06 am ] |
| Post subject: | |
Nice work, Ron! Where are you located exactly? Hope we can see you at the Hagerstown, MD race next year, or some other Slant 6 event... Happy building, Lou |
|
| Author: | 1969ronnie [ Wed Aug 11, 2010 6:34 am ] |
| Post subject: | |
hi lou, i am about 10 minutes south of worcester ma. . i lived in fredricksburg va. for a few years. my wife met greg and his wife at mopar's calisle and we would love to try and attend some other slant six events. greg has a beautiful car and we had a great time at carlisle. there is another post going about cleaning a slant six. hope my pictures help out. |
|
| Author: | Dart270 [ Wed Aug 11, 2010 7:46 am ] |
| Post subject: | |
Hi Ron, We are contemplating another Slant 6 race further north in the next 1-2 years, and solid interest from folks like you (like attendance at Hagerstown or if we get a Carlisle race going) would help make this happen. Possible locations would be Englishtown, NJ or Lebanon Valley, NY. Hope to meet you in person sometime soon! Lou |
|
| Author: | 1969ronnie [ Fri Aug 27, 2010 9:55 am ] |
| Post subject: | bh block decking |
 
|
|
| Author: | 1969ronnie [ Fri Aug 27, 2010 9:59 am ] |
| Post subject: | block decking |
 
|
|
| Page 2 of 4 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|