eagerly awaiting pics!
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| New Aussie Speed Short Runner Intake https://www.slantsix.org/forum/viewtopic.php?t=41837 |
Page 2 of 3 |
| Author: | Dart270 [ Fri Sep 17, 2010 7:47 am ] |
| Post subject: | |
Mark, This all sounds great. I assume the header coating is JET HOT ceramic type, or equivalent? That is worth about $175-200 right there. I just had Jet Hot do 2 sets for me. Hopefully Frank can get going on a header group buy. I like the short runner design too. Thanks again for your efforts! Lou |
|
| Author: | 66aCUDA [ Fri Sep 17, 2010 7:51 am ] |
| Post subject: | |
Ill start a new thread Sunday night with some pictures and pricing. Really Busy til then. Frank |
|
| Author: | Valleyant [ Mon Sep 20, 2010 8:50 am ] |
| Post subject: | |
eagerly awaiting pics!
|
|
| Author: | 66aCUDA [ Tue Sep 21, 2010 7:50 am ] |
| Post subject: | |
Sorry Guys Im waiting to here back from Mark. I need to get some things clarified before i move forward on this. Frank |
|
| Author: | Joshie225 [ Tue Sep 21, 2010 8:56 am ] |
| Post subject: | |
I really wish those 1 5/8" headers fit a 170. Are there any pictures of them installed on a '66 or older LHD A-body? |
|
| Author: | 66aCUDA [ Wed Sep 22, 2010 6:36 am ] |
| Post subject: | |
Josh These will NOT fit 66 down A's. We have in the wings a set of Long tubes for the 170 and 225 for 60-66 Yes even the toads. Costs are high and times are long to bring these to market so PLEASE be patient. Frank 
|
|
| Author: | Joshie225 [ Wed Sep 22, 2010 7:35 am ] |
| Post subject: | |
OK, thanks for the info. In this case Mister Twister in Florida may beat you to market with the 170 headers. If no one has any ready I'll be building them with a little help. |
|
| Author: | SV162 [ Thu Feb 24, 2011 10:18 pm ] |
| Post subject: | |
Here's some pics for those who haven't seen it yet.  
|
|
| Author: | madmax/6 [ Thu Feb 24, 2011 11:09 pm ] |
| Post subject: | |
The quality of the headers is FANTASTIC,wish I could use them,but with my rear Toyota rack and my engine beeing set back 2 inches,I would have to cut them up too much.That manifold looks very promiseing for all.The long runner Hurricain is very good for street strip driven cars but for all out drag raceing,full throttle only, I couldnt get it to work like I wanted it to work.Willing to bet this new manifold would work alot better for all out racing and will bee great on streetmotors.I predict it will bee the manifold to have.Guzzi Mark |
|
| Author: | Rick Covalt [ Fri Feb 25, 2011 3:54 am ] |
| Post subject: | Pics |
SV162, Can't see your pics? |
|
| Author: | daniel_depetro [ Fri Feb 25, 2011 12:21 pm ] |
| Post subject: | |
Right click on the 'x' and copy/paste the link address in a new window. Then it'll work. I've been waiting to see photos of this intake. I feel a they would have been far more visually pleasing over the changeable top design, but I understand the methods for doing such. |
|
| Author: | Rick Covalt [ Fri Feb 25, 2011 1:05 pm ] |
| Post subject: | No go |
Still won't work. I don't see an X . When I click on the icon where the pic are supposed to be it says forbidden when I try and open it in a new window, Rick |
|
| Author: | Joshie225 [ Fri Feb 25, 2011 1:15 pm ] |
| Post subject: | |
I just found that if I visit the aussiespeed web site the pictures now show up in this thread. It must be a restriction based on a cookie being set. |
|
| Author: | Fopar [ Fri Feb 25, 2011 1:32 pm ] |
| Post subject: | |
Try this http://www.aussiespeed.com/index.php?op ... &Itemid=23 Richard |
|
| Author: | emsvitil [ Fri Feb 25, 2011 4:32 pm ] |
| Post subject: | |
The pictures work in firefox, but not ie8 64bit........ |
|
| Page 2 of 3 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|