| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Guzzi car pics. https://www.slantsix.org/forum/viewtopic.php?t=47421 |
Page 2 of 5 |
| Author: | Big T [ Wed Jan 04, 2012 7:22 pm ] |
| Post subject: | |
Nice work Mark.... You continue to impress me!!!! |
|
| Author: | madmax/6 [ Wed Jan 04, 2012 8:42 pm ] |
| Post subject: | |
ANYONE can come visit anytime,,I might make ya work on car with me though.If ya come on a thursday I might make you go to track and make you make a couple passes in my car.Mark |
|
| Author: | madmax/6 [ Wed Jan 04, 2012 9:05 pm ] |
| Post subject: | |
And Lou.You have cost me thousands and thousands of dollars and way too many hours to count,I am gratefull.I never thought about building a fast slant till I met you at Spring Fling.MY madness is all your fault.Thank You.Mark |
|
| Author: | Fopar [ Wed Jan 04, 2012 9:23 pm ] |
| Post subject: | |
If ya come on a thursday I might make you go to track and make you make a couple passes in my car.Mark Does that mean I could drive your car Richard |
|
| Author: | Dart270 [ Thu Jan 05, 2012 7:56 am ] |
| Post subject: | |
Mark, I'll try to make it up there on one of those Thurs eves if at all possible. Would love to see the car run and maybe take a pass or two. I'll take your "initiation by Lou" as a compliment! If I get nutz and can swing the time off, I might drive the '64 Dart out... BTW, when I visit a Slanter for more than a few hrs, I ALWAYS work on their car or help with something around their place. Just ask Sam, Doc, Mike Andreas.... Lou |
|
| Author: | madmax/6 [ Thu Jan 05, 2012 6:59 pm ] |
| Post subject: | |
Ground and sanded down leading edge of roof aluminum panel and now have flush,and kinda rivets still there.Will re bond one corner.Mark |
|
| Author: | Dart270 [ Thu Jan 05, 2012 7:57 pm ] |
| Post subject: | |
It looks like my work gig in San Diego is done midday on Thursday 3/29, so I could get up there for Thurs eve t'n't. Lou |
|
| Author: | Doc [ Fri Jan 06, 2012 4:44 pm ] |
| Post subject: | |
Quote: If ya come on a thursday I might make you go to track and make you make a couple passes in my car.Mark
Fopar, If you get down there, you better bring a "booster seat"... Does that mean I could drive your car Richard or we will have to tape 4 x 4 blocks to your feet, so you can reach the peddles. (No, Guzzi Mark will not move his driver's seat for you) DD |
|
| Author: | Fopar [ Fri Jan 06, 2012 6:24 pm ] |
| Post subject: | |
Doc you know he isn't that much taller than me, just a lot heaver Richard |
|
| Author: | ceej [ Sat Jan 07, 2012 11:42 am ] |
| Post subject: | |
Need a couple pillows to keep him from sliding back and forth in that cavernous racing bucket! Wouldn't want a charge of elder abuse. If he wears his killer rabbit slippers, they should just reach the pedals. CJ PS: For Killer Rabbit Reference |
|
| Author: | sandy in BC [ Sat Jan 07, 2012 1:13 pm ] |
| Post subject: | |
I know this is a fambly site.....and this will end up in Mod Review.....but I feel compulsed to tell you I have the Matching PJs. <SnOrK>! |
|
| Author: | ceej [ Sat Jan 07, 2012 3:28 pm ] |
| Post subject: | |
Quote: .....but I feel compulsed to tell you I have the Matching PJs.
Go change your armor! <SnOrK>! CJ |
|
| Author: | Big T [ Sat Jan 07, 2012 3:35 pm ] |
| Post subject: | |
Fopar will need a couple of 4x4 on either side to prop him up on the side.... He might weigh 100 lbs....Wet! |
|
| Author: | Fopar [ Sat Jan 07, 2012 5:55 pm ] |
| Post subject: | |
Terry with a couple of beers and fully dressed I would maybe hit 130lb. I would like the pillows over 4X4's as they are softer. Richard |
|
| Author: | Rob Simmons [ Sat Jan 07, 2012 6:58 pm ] |
| Post subject: | |
And LIGHTER! Don't forget who's car we're talking about here... |
|
| Page 2 of 5 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|