Why don't you just throw them things (Slant and 5 speed) in the beer truck and show up at Hamilton, Bristol or Clay City..?
Come to think of it... Bring that Lincoln rear end too.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 225 Crate Engine https://www.slantsix.org/forum/viewtopic.php?t=52054 |
Page 2 of 3 |
| Author: | Doc [ Tue May 14, 2013 11:38 am ] |
| Post subject: | |
Quote: ...and degreeing the cam is essential for best performance...
Also... set the static compression ratio, to match the cam and it's "phasing", when installed in the engine. (Set your Dynamic Compression Ratio to support the fuel you intend to use)DD |
|
| Author: | sandy in BC [ Tue May 14, 2013 12:46 pm ] |
| Post subject: | |
Just to be clear ......the unit Im offering is not a new rebuilt engine.....it has about 5000 miles on it. It was not bored and honed with a torque plate . The rods have been balanced but the rotating assembly has not. The valves are not premium valves....they are medium duty Chev valves as are the springs It has a Dutra oil pump....Erson cam installed +4....Hughes roller chain and Smith Bros pushrods. Cr is 9.25 ....runs on 87 The head has been radiussed around the valves and bowl hogged. No porting other than a cleanup has been done. Experience would indicate this motor will make between 160 - 180 hp and has outstanding torque and drivability. It comes with a distributor dialed in for a 5 speed 2800lb car. For extra money it can come with a 5 speed . |
|
| Author: | Rob Simmons [ Tue May 14, 2013 1:12 pm ] |
| Post subject: | |
Why don't you just throw them things (Slant and 5 speed) in the beer truck and show up at Hamilton, Bristol or Clay City..? Come to think of it... Bring that Lincoln rear end too.
|
|
| Author: | sandy in BC [ Tue May 14, 2013 1:21 pm ] |
| Post subject: | |
Our operators are standing by waiting for your credit card number.... "Would you Like to use your Slantcard for that sir?" I cant get away from here until July....I cant even get a day off. |
|
| Author: | Rob Simmons [ Tue May 14, 2013 6:30 pm ] |
| Post subject: | |
Quote: Our operators are standing by waiting for your credit card number....
I PM'd it to ya. I put a little extra in there fer the delivery charge too. "Would you Like to use your Slantcard for that sir?" I cant get away from here until July....I cant even get a day off. Looks like Bristol or Clay City it is... I'll bring a truck.
|
|
| Author: | Jester [ Tue May 14, 2013 8:25 pm ] |
| Post subject: | |
If that deal falls through, Sandy, then Jester in BC is next in-line (incline?) 
|
|
| Author: | Rob Simmons [ Wed May 15, 2013 5:44 am ] |
| Post subject: | |
Hey Jester! I'm just funnin' with Sandy.  I'm all talk (type) and no action.  Have at it!
|
|
| Author: | slantzilla [ Wed May 15, 2013 8:21 am ] |
| Post subject: | |
Quote: I cant get away from here until July....I cant even get a day off. 
|
|
| Author: | sandy in BC [ Wed May 15, 2013 5:04 pm ] |
| Post subject: | |
Dick....My boss is a man. Boss....my man is a dick so many permutations.....so little time |
|
| Author: | Eatkinson [ Mon Jun 17, 2013 11:18 pm ] |
| Post subject: | |
Quote: That is a deal. I have 1500-1800 in my rebuild already.
No kidding. Me as well. That is a deal.
|
|
| Author: | sandy in BC [ Tue Jun 18, 2013 6:48 am ] |
| Post subject: | |
Still available...... |
|
| Author: | DynoDave [ Tue Jun 25, 2013 2:08 pm ] |
| Post subject: | |
Quote: Still available......
Why are these deals ALWAYS on the west coast!
|
|
| Author: | bigandbulky [ Sat Apr 26, 2014 4:30 pm ] |
| Post subject: | |
Don't suppose someone has a bored and stroked 260 with the crank already welded and ground? |
|
| Author: | sandy in BC [ Sat Apr 26, 2014 4:58 pm ] |
| Post subject: | |
no........but the above mentioned build is still available. It can still come with a 5 speed. so many PMs .....so few buyers. |
|
| Author: | White74dart [ Sat Nov 17, 2018 4:49 pm ] |
| Post subject: | Re: |
Quote: Ill sell you a performance 225 and ship it to you......on a pallet.
Is it possible for me to get a 225 performance motor built were are you located
|
|
| Page 2 of 3 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|