That sounds like the plate I have... made by Cecil Yother.
It has a 3.5 bore size.
I also have a 'home made' plate with a 3.445 bore.
That plate is actually the sawed-off top deck of an old engine block, with drilled-out head bolt holes.
DD
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Any interest in a Torque Plate for the Slant 6's? https://www.slantsix.org/forum/viewtopic.php?t=60907 |
Page 2 of 2 |
| Author: | Doctor Dodge [ Thu Mar 23, 2017 3:24 am ] |
| Post subject: | |
That sounds like the plate I have... made by Cecil Yother. It has a 3.5 bore size. I also have a 'home made' plate with a 3.445 bore. That plate is actually the sawed-off top deck of an old engine block, with drilled-out head bolt holes. DD
|
|
| Author: | Charrlie_S [ Thu Mar 23, 2017 5:35 am ] |
| Post subject: | |
Quote: That sounds like the plate I have... made by Cecil Yother...
It has a 3.5 bore size. DD Looks just like the one I have |
|
| Author: | CNC-Dude [ Thu Mar 23, 2017 1:26 pm ] |
| Post subject: | |
The Slant guys definitely do a lot more involved racing than other inliners are doing. So that's why I am asking. Mine will be much cheaper than a store bought one and can accommodate what ever bore size you need as well as 1/2" head bolt conversions, which for that you will definitely need a torque plate to compensate for the extra stressing of the deck and cylinders when its bored. |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|