Slant Six Forum
https://www.slantsix.org/forum/

Windage Trays - Interest
https://www.slantsix.org/forum/viewtopic.php?t=64691		 Page 12 of 14
Author:  Rick Covalt [ Thu Oct 20, 2022 4:35 pm ]
Post subject:  Re: Windage Trays - Interest
All trays are welded up and look good. Just a little deburring to try and make sure there is no slag left on them and then coat them with oil and bag them up until the bolts are done. RC
Author:  Rick Covalt [ Mon Oct 31, 2022 2:33 pm ]
Post subject:  Re: Windage Trays - Interest
Picked up the bolts today. I will be getting some pricing on shipping in a day or two. Then I can get you all your totals and get them shipped out shortly after that.
Author:  Rick Covalt [ Fri Nov 04, 2022 6:17 pm ]
Post subject:  Re: Windage Trays - Interest
Ok I will likely have all of the trays deburred, cleaned and sprayed down with WD 40 tomorrow. I will get the bolts all bagged up and get everything boxed and ready to ship shortly. So it is time for everyone to send me the rest of the money for the trays and shipping. I am not sending 18 individual PM's with your totals. I am sure you can all add. :D :D Take what you owe me and add the shipping cost and send it to me by Paypal. I went to Fed Ex ground and plugged in some cities and got prices for shipping. Pick the closest town to you or one a similar distance and use that for your shipping cost. I trust you. The trays will be shipped to whoever pays me first. Thanks , Rick

Rounded to the nearest dollar:
Los Angelos & Phoenix- $24
Dallas- $20
Miami & St, Louis - $18
Chicago- $15
New York- $12
Author:  NCDemon1971 [ Sat Nov 05, 2022 11:29 am ]
Post subject:  Re: Windage Trays - Interest
I believe mine was paid for in full via PayPal. If it wasn't, let me know. I can be forgetful at times. Thank you :D
Author:  Rick Covalt [ Sat Nov 05, 2022 11:56 am ]
Post subject:  Re: Windage Trays - Interest
Correct Micahel! I may own you a couple bucks!
Author:  NCDemon1971 [ Sat Nov 05, 2022 1:04 pm ]
Post subject:  Re: Windage Trays - Interest
Thanks!
Also appreciated that you put this into motion!
Author:  Valleyant [ Sat Nov 05, 2022 6:29 pm ]
Post subject:  Re: Windage Trays - Interest
Quote:
Ok I will likely have all of the trays deburred, cleaned and sprayed down with WD 40 tomorrow. I will get the bolts all bagged up and get everything boxed and ready to ship shortly. So it is time for everyone to send me the rest of the money for the trays and shipping. I am not sending 18 individual PM's with your totals. I am sure you can all add. :D :D Take what you owe me and add the shipping cost and send it to me by Paypal. I went to Fed Ex ground and plugged in some cities and got prices for shipping. Pick the closest town to you or one a similar distance and use that for your shipping cost. I trust you. The trays will be shipped to whoever pays me first. Thanks , Rick

Rounded to the nearest dollar:
Los Angelos & Phoenix- $24
Dallas- $20
Miami & St, Louis - $18
Chicago- $15
New York- $12
Copy That, M/O will be on it's way. Thanks Rick
Author:  Rick Covalt [ Tue Nov 08, 2022 2:40 pm ]
Post subject:  Re: Windage Trays - Interest
Sent out Michael Glass and Doug Buckley's today. Should have them end of the week sometime.

Walter Lee Jackson, going out Thursday
Author:  mr.norm [ Thu Nov 10, 2022 2:48 am ]
Post subject:  Re: Windage Trays - Interest
Just sent my payment via Paypal. Thanks very much for all the effort you put into this!!! Norm
Author:  Rick Covalt [ Thu Nov 10, 2022 2:40 pm ]
Post subject:  Re: Windage Trays - Interest
Mr. Crumudgeon & Mr Norm's going out Friday.
Author:  rosspulliam [ Thu Nov 10, 2022 5:57 pm ]
Post subject:  Re: Windage Trays - Interest
Quote:
Ok I will likely have all of the trays deburred, cleaned and sprayed down with WD 40 tomorrow. I will get the bolts all bagged up and get everything boxed and ready to ship shortly. So it is time for everyone to send me the rest of the money for the trays and shipping. I am not sending 18 individual PM's with your totals. I am sure you can all add. :D :D Take what you owe me and add the shipping cost and send it to me by Paypal. I went to Fed Ex ground and plugged in some cities and got prices for shipping. Pick the closest town to you or one a similar distance and use that for your shipping cost. I trust you. The trays will be shipped to whoever pays me first. Thanks , Rick

Rounded to the nearest dollar:
Los Angelos & Phoenix- $24
Dallas- $20
Miami & St, Louis - $18
Chicago- $15
New York- $12
Just to clarify, $20 to Dallas is for both of mine? My check will hit the mail as soon as I know if I need to pad the shipping a bit for my 2 trays.
Author:  Rick Covalt [ Thu Nov 10, 2022 6:26 pm ]
Post subject:  Re: Windage Trays - Interest
No those prices were for one tray. $29 for 2 to Dallas.
Author:  NCDemon1971 [ Fri Nov 11, 2022 8:53 am ]
Post subject:  Re: Windage Trays - Interest
Got mine today. Looks great!
Thanks :D
Author:  Rick Covalt [ Fri Nov 11, 2022 4:08 pm ]
Post subject:  Re: Windage Trays - Interest
Great!

Just a little additional info for everyone. Please do go over them again and check for any weld spalds / splatter. I did try to get this all off but I may have missed a spot. All the trays were wiped down with a anti rust agent, and then they were sprayed down and wiped off with WD 40. They should not rust for a while but the phosphorus, anti rust agent does turn then a little bit of a duller gray. All of the mounting studs were cleaned and then they were tightened up in the mounting bolts with Red lock tight. They should be ready to go. The thick 1/2" washers are premium Moroso pieces. Don't forget to use them!! :D :D
Author:  Rick Covalt [ Mon Nov 14, 2022 5:13 pm ]
Post subject:  Re: Windage Trays - Interest
Quote:
Mr. Crumudgeon & Mr Norm's going out Friday.
Sorry guys , but none of the shippers picked up on Friday due to the holiday. They should have gone out this afternoon. Rick
Page 12 of 14 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/