Slant Six Forum
https://www.slantsix.org/forum/

Covalt - "Project 65 Valiant"
https://www.slantsix.org/forum/viewtopic.php?t=35632		 Page 124 of 124
Author:  slantzilla [ Wed Jan 08, 2025 8:20 am ]
Post subject:  Re: Covalt - "Project 65 Valiant"
Should be.
Author:  Rick Covalt [ Wed Jan 08, 2025 9:33 am ]
Post subject:  Re: Covalt - "Project 65 Valiant"
Quote:
Should be.
Hmmm? Should I trust you? You may be trying to make me run slower so when we meet up you don't get flogglewhomped! :D :D Thanks!
Author:  Rob Simmons [ Wed Jan 08, 2025 9:35 am ]
Post subject:  Re: Covalt - "Project 65 Valiant"
Quote:
Quote:
Should be.
flogglewhomped!
:lol: :lol: I like it!
Author:  Dart270 [ Wed Jan 08, 2025 12:02 pm ]
Post subject:  Re: Covalt - "Project 65 Valiant"
Good to know it was that big of a change. It may not make the car faster overall, but it will make the low/midrange and idle better. May not matter depending on your converter stall.

0.032" should not hurt it.

Lou
Author:  Rick Covalt [ Wed Jan 08, 2025 1:39 pm ]
Post subject:  Re: Covalt - "Project 65 Valiant"
Quote:
May not matter depending on your converter stall.
Andre (Edge) built mine for 4000.
Author:  slantzilla [ Wed Jan 08, 2025 8:18 pm ]
Post subject:  Re: Covalt - "Project 65 Valiant"
Quote:
Quote:
Should be.
Hmmm? Should I trust you? You may be trying to make me run slower so when we meet up you don't get flogglewhomped! :D :D Thanks!
It's good you have a dream.

I've already been low .70s.

Don't sing it, bring it. :mrgreen:
Author:  Rick Covalt [ Tue Mar 18, 2025 5:43 pm ]
Post subject:  Re: Covalt - "Project 65 Valiant"
I drove the car to work a day last week and it feels soooo good! I can't believe how it pulls. Oops! I forgot I still have the 4.89 gears in it from last fall at Knoxville. :D :D That's why it feels so fast! Still wish I could get a "good weather" run with these gear in. I feel certain I could get into the 7's in the 1/8 mile. It has gone 8.0 with 4.30 gears. Guess another gear change is in my near future!
Author:  Greg Ondayko [ Wed Mar 19, 2025 6:28 am ]
Post subject:  Re: Covalt - "Project 65 Valiant"
Your 2 Mile Jaunt from Buttermik to Quincy should be fun!

I think there should be some TNT's at Mason Dixon soon?

what about Quarter Aces Drag -o- Way? you should be able to get up there before easter.

Best of Luck, and See you in May!

Greg
Author:  slantzilla [ Thu Mar 20, 2025 11:54 am ]
Post subject:  Re: Covalt - "Project 65 Valiant"
I've been 8.02 with 4.86 gears. I think with some tuning I can get to 7.80s.
Author:  Greg Ondayko [ Mon May 05, 2025 5:29 pm ]
Post subject:  Re: Covalt - "Project 65 Valiant"
Well, whatwusit?
Author:  Rick Covalt [ Mon May 05, 2025 6:20 pm ]
Post subject:  Re: Covalt - "Project 65 Valiant"
You have to give a guy time! I was eating a bowl of ice cream! :D :D
Attachment:
IMG_0167.jpg
IMG_0167.jpg [ 52.64 KiB | Viewed 2507 times ]
See anything different about #6 cylinder? Yes I had a rocker arm lock nut come loose and then the push rod fell out. Basically finished the run on 5 cylinders! :D I pulled the pushrod and the lifter and both looked great. Dropped the lifter back in and set the valve lash, then fired her up. All sounded well. So that was good news. If I would just have had 10 or 15 minutes I would have fixed it and made the Semi rd. Or I may have had a bye into the final. (Only 3 cars left) But didn't want to chance it.

Car had 4.56 gears in it so I knew the mph would be off a little. Plus the weather was about 100% rain in the air all afternoon :D :D

Car ran: 13:01 / 101.03
----------13.01 / 101.28
----------13.03 / 101.40
----------13.07 / 101.58
Author:  Dart270 [ Tue May 06, 2025 4:40 am ]
Post subject:  Re: Covalt - "Project 65 Valiant"
Glad to hear it was simple! Are those factory adjuster screws? Hard to see. If so, you might need shorter pushrods.

Lou
Author:  Greg Ondayko [ Tue May 06, 2025 5:07 am ]
Post subject:  Re: Covalt - "Project 65 Valiant"
Quick Fix! Great.

I thought it would be something simple as you kind of thought, as when you pulled it up on the trailer it did not sound catastrophic to me.

Lou, Rick swapped out to non stock adjuster screws, so the locknut/ jamnut is required.

Greg
Author:  Dart270 [ Tue May 06, 2025 6:03 am ]
Post subject:  Re: Covalt - "Project 65 Valiant"
Gotcha.
Page 124 of 124 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/