| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Electric fan questions https://www.slantsix.org/forum/viewtopic.php?t=13495 |
Page 3 of 3 |
| Author: | textoad [ Mon Jul 04, 2005 7:26 pm ] |
| Post subject: | |
I was considering the bottom but the only convenient spot is the stopcock. Hmmm. |
|
| Author: | bondo_jonze [ Sat Jul 09, 2005 12:26 pm ] |
| Post subject: | |
Some ideas I havent done this yet but I am thinking about it. In summit they sell " in line " meaning in hose drain fittings. I was thinking that a sesor could be fitted in one of those. Of course if one had access to a welder a bung could be fitted in a pice of properly sized exhaust pipe. Give the inside of the pipe a good coat of paint and it should last for a long time. I have had electric fans on my D300 for a while, one from a taurus and a smaller one from a sentra. both pulling, hard wired to toggle switches. It works good to cool (when I remember to turn them on) a 360/NP435 utility bed truck no matter how heavy the load. Most everything is stock about the 360 and it is fairly worn out. Just some ideas |
|
| Page 3 of 3 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|