just a slight update, i am still missing one of the kick down pices, studs, and the gasket that goes between the manafolds and head.
this is the throttle spring return bracket i made, it works really well and does not move one bit. yay!
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| MiDi's Super Six Project https://www.slantsix.org/forum/viewtopic.php?t=28116 |
Page 3 of 3 |
| Author: | MiDi [ Mon Apr 28, 2008 11:04 pm ] |
| Post subject: | |
come see for your self and have a beer. |
|
| Author: | dank10fenny [ Tue Apr 29, 2008 11:55 pm ] |
| Post subject: | |
dood i want too and i can help ya rebuild that carb, ha |
|
| Author: | MiDi [ Wed Apr 30, 2008 12:21 am ] |
| Post subject: | |
dusteridiot rebuilt the bbd it and its freaking awesome! i can't wait till i get this done. i just need a few minor items, the project is almost ready. if anyone wants to help i'll buy the beer! |
|
| Author: | MiDi [ Fri May 02, 2008 5:06 pm ] |
| Post subject: | |
just a slight update, i am still missing one of the kick down pices, studs, and the gasket that goes between the manafolds and head. this is the throttle spring return bracket i made, it works really well and does not move one bit. yay!
|
|
| Author: | dank10fenny [ Fri May 02, 2008 9:01 pm ] |
| Post subject: | |
interesting return spring brtacket, is that stock, i dont even member what mine is like. and when am i gonna make u some glass that says super six or mopar or somthin cool |
|
| Author: | MiDi [ Fri May 02, 2008 9:08 pm ] |
| Post subject: | |
nope not stock, i made it. seems to work ok. you have my # dank10fenny, i'll be in portland all weekend. i'm too broke to come up with the race fee's and gas to go to woodburn tomorrow. errrrrrrrrrr!!! 
|
|
| Author: | Backtobasics [ Sat May 03, 2008 11:19 am ] |
| Post subject: | |
Nice Progress! |
|
| Author: | Andy's GT [ Sat May 03, 2008 3:52 pm ] |
| Post subject: | |
nice! i made my own return bracket out of a piece of light angle iron, took off one side and rounded the others with an angle grinder. hung it from a wire and gave it a few coats of engine gloss black and clear coat from the rattle can, its not as beefy or nice looking as yours but it works! of course after that i saw a nice looking chrome one at the parts store for cheap...good work! |
|
| Author: | MiDi [ Sat May 03, 2008 5:05 pm ] |
| Post subject: | |
well now i know why a complete setup cost so much cause its a total &%#$! to find all the parts!  &*&(*&_!!! (*!!!*&#_(!! !*&#!_(#*&_!!!!!!!!!!
|
|
| Author: | MiDi [ Wed May 07, 2008 11:27 am ] |
| Post subject: | |
Here is a page scan from the dealer's orginal MOPAR replacement parts book for the super six. Printed in March 1979. It has all the part numbers and I figured it should be displayed to help someone else with there future or current super six project. This was not easy to get, I also have the 1bbl replacement parts sheet scan. P/M me with an e-mail / addy if you would like the orginal scans or photocopys of these documents. never let a moparpunk with a laptop and a scanner loose around vintage parts books 
|
|
| Author: | MiDi [ Sun Jun 15, 2008 10:52 pm ] |
| Post subject: | |
the end to this post has been moved to here: http://www.slantsix.org/forum/viewtopic.php?t=29510 |
|
| Page 3 of 3 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|