I can do the West Coast receiving and re-shipping.

_________________
Joshua

if its possible to order two head gaskets and two intake-exhaust gaskets,in this mix, count me in,, just let me know where to send the cheque..
\
if not,, cool, will do at another time.

thanks

Count me in for the 4bbl. PM me with whatever info is needed.

If you want a manifold and have not received a PM from Rayman440 please contact him directly. He's our vendor from Pentastar Parts & Restorations.

_________________
Joshua

I have asked Ray about head gasket pricing.

I believe mopardemon71 is handling West shipping from his place?? He is the point man on this project.

Lou

_________________
Home of Slant6-powered fun machines since 1988

Hi every one i have done the changes on the blower manifold & apart from the retainers & the springs for the blow off valves {that are on order } once cast & machined the manifold will be ready. i need some numbers on how many i need to get cast so i can fill the order for forum members . As a matter of interest i can supply the manifold face where the blower bolts on machined but not drilled for those that want to make there own drives. I can also supply the blowers for those who want to run our Aussie made blower that will take a carb on the top. I hope to have pricing on the blowers next week & depending on the US dollar a price for the manifolds. Shipping will be the same if there are scattered destinations we may have to split the shipment. Ray has been working on putting a kit together for pulleys, drive & idler. These components will be available from PP&R at some stage.. I also need numbers for the 2 & 4 barrel manifolds & blower manifolds as i want to include a small gift to all buyers.. regards Mark AussieSpeed

_________________
www.aussiespeed.com

Mark,

This is great news. I am interested in info about the Aussie blowers, although I will be using port EFI. I also have Ford M90 that hopefully will bolt on.

My biggest concern is how to get the snout/pulley far enough forward to interface with the crank pulley on the engine. Is there a long snout available for the M90, or?? How does the Aussie blower relate to the Eaton M90, if at all?

Thanks again,

Lou

_________________
Home of Slant6-powered fun machines since 1988

Alright,this seems to be moving along nicely. Has anyone decided on a date for this?

Um, VERY soon. You hopefully will get a PM from Rayman440 with payment info and hopefully they will be on their way sometime next week.

I assume you are talking about the 2bbl/4bbl group buy. I don't know dates on the blower manifold yet.

If you did not get a PM from Ray, then email him at sales@pentastarparts.com.au

Best,

Lou

_________________
Home of Slant6-powered fun machines since 1988

if you are on the west coast order up NOW to get it in. Joshie you can take delivery if you want . unless there is a more centraly loactaed person. I'm in tucson az but most west coaster's are in north caili it would seem. so west coast guys order by tuesday next week. to break good on shipping, we westside guys need at least 5 or more.

_________________
it's like a vw, sounds like a million miles an hour but goes really slow. (for now)

i meant north of calil sorry.

_________________
it's like a vw, sounds like a million miles an hour but goes really slow. (for now)

OK, I am gathering info on the supercharger for every 1 now.
The super charger is available in 2 types, radial { carb pad on top like a GM roots style} & axial {rear entry} fuel injection style. There are drives available off the shelf.
I will get some pics & more info together & post it shortly... stay tunned...
Regards Mark

_________________
www.aussiespeed.com

is this still on for the westcoast guys? any idea how much extra to ship to Vancouver, BC Canada?

if you can get a group to gether we can send a shipment to Canada also. if there is a few up there i can get a quote on shipping if you can give me some numbers..

_________________
www.aussiespeed.com

Hi guys,

The deadline for ordering will be July 15. I need all participating parties to contact me asap to finalize this deal. I have sent correspondence to all users that indicated interest in this group buy, there are a couple that I have not had a reply from. If for some reason you have not received my correspondence and would like to participate, please email me directly : sales@pentastarparts.com.au

Currently, we are working on two shipments. The delegates are as follows :

~ West Coast (Joshie225)
~ East Coast (Dart270)

There has been interest in other products, so far here is a list of prices for consideration.

~ Hurricane Intake Manifold (2 or 4-Barrel) : US$350
~ SureSeal Graphite Manifold Gasket : US$15
~ PermaSeal Head Gasket : US$30
~ Triple Weber Intake Manifold : US$305

These prices are the 'landed' US costs for each component and does not include local shipping for your East or West coast delegate to your door.

Time is running out, please help me to get this sorted out asap. Thanks folks, I look forward to getting this deal moving.

kind regards,
Ray
Pentastar Parts & Restorations