i meant north of calil
sorry.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Aussiespeed intakes group buy - respond ASAP https://www.slantsix.org/forum/viewtopic.php?t=36091 |
Page 3 of 7 |
| Author: | Joshie225 [ Thu Jul 09, 2009 7:23 pm ] |
| Post subject: | |
I can do the West Coast receiving and re-shipping. |
|
| Author: | DadTruck [ Thu Jul 09, 2009 8:16 pm ] |
| Post subject: | |
if its possible to order two head gaskets and two intake-exhaust gaskets,in this mix, count me in,, just let me know where to send the cheque.. \ if not,, cool, will do at another time. thanks |
|
| Author: | Dizzydean [ Thu Jul 09, 2009 8:54 pm ] |
| Post subject: | |
Count me in for the 4bbl. PM me with whatever info is needed. |
|
| Author: | Joshie225 [ Thu Jul 09, 2009 9:36 pm ] |
| Post subject: | |
If you want a manifold and have not received a PM from Rayman440 please contact him directly. He's our vendor from Pentastar Parts & Restorations. |
|
| Author: | Dart270 [ Fri Jul 10, 2009 6:13 am ] |
| Post subject: | |
I have asked Ray about head gasket pricing. I believe mopardemon71 is handling West shipping from his place?? He is the point man on this project. Lou |
|
| Author: | AussieSpeed [ Fri Jul 10, 2009 7:18 am ] |
| Post subject: | |
Hi every one i have done the changes on the blower manifold & apart from the retainers & the springs for the blow off valves {that are on order } once cast & machined the manifold will be ready. i need some numbers on how many i need to get cast so i can fill the order for forum members . As a matter of interest i can supply the manifold face where the blower bolts on machined but not drilled for those that want to make there own drives. I can also supply the blowers for those who want to run our Aussie made blower that will take a carb on the top. I hope to have pricing on the blowers next week & depending on the US dollar a price for the manifolds. Shipping will be the same if there are scattered destinations we may have to split the shipment. Ray has been working on putting a kit together for pulleys, drive & idler. These components will be available from PP&R at some stage.. I also need numbers for the 2 & 4 barrel manifolds & blower manifolds as i want to include a small gift to all buyers.. regards Mark AussieSpeed |
|
| Author: | Dart270 [ Fri Jul 10, 2009 9:49 am ] |
| Post subject: | |
Mark, This is great news. I am interested in info about the Aussie blowers, although I will be using port EFI. I also have Ford M90 that hopefully will bolt on. My biggest concern is how to get the snout/pulley far enough forward to interface with the crank pulley on the engine. Is there a long snout available for the M90, or?? How does the Aussie blower relate to the Eaton M90, if at all? Thanks again, Lou |
|
| Author: | raPoM [ Fri Jul 10, 2009 11:00 am ] |
| Post subject: | |
Alright,this seems to be moving along nicely. Has anyone decided on a date for this? |
|
| Author: | Dart270 [ Fri Jul 10, 2009 1:08 pm ] |
| Post subject: | |
Um, VERY soon. You hopefully will get a PM from Rayman440 with payment info and hopefully they will be on their way sometime next week. I assume you are talking about the 2bbl/4bbl group buy. I don't know dates on the blower manifold yet. If you did not get a PM from Ray, then email him at sales@pentastarparts.com.au Best, Lou |
|
| Author: | mopardemon71 [ Sat Jul 11, 2009 10:45 am ] |
| Post subject: | |
if you are on the west coast order up NOW to get it in. Joshie you can take delivery if you want . unless there is a more centraly loactaed person. I'm in tucson az but most west coaster's are in north caili it would seem. so west coast guys order by tuesday next week. to break good on shipping, we westside guys need at least 5 or more. |
|
| Author: | mopardemon71 [ Sat Jul 11, 2009 10:48 am ] |
| Post subject: | |
i meant north of calil sorry.
|
|
| Author: | AussieSpeed [ Sat Jul 11, 2009 3:38 pm ] |
| Post subject: | |
OK, I am gathering info on the supercharger for every 1 now. The super charger is available in 2 types, radial { carb pad on top like a GM roots style} & axial {rear entry} fuel injection style. There are drives available off the shelf. I will get some pics & more info together & post it shortly... stay tunned... Regards Mark |
|
| Author: | Jester [ Sat Jul 11, 2009 6:53 pm ] |
| Post subject: | |
is this still on for the westcoast guys? any idea how much extra to ship to Vancouver, BC Canada? |
|
| Author: | AussieSpeed [ Sat Jul 11, 2009 7:55 pm ] |
| Post subject: | |
if you can get a group to gether we can send a shipment to Canada also. if there is a few up there i can get a quote on shipping if you can give me some numbers.. |
|
| Author: | Rayman440 [ Sun Jul 12, 2009 7:02 pm ] |
| Post subject: | |
Hi guys, The deadline for ordering will be July 15. I need all participating parties to contact me asap to finalize this deal. I have sent correspondence to all users that indicated interest in this group buy, there are a couple that I have not had a reply from. If for some reason you have not received my correspondence and would like to participate, please email me directly : sales@pentastarparts.com.au Currently, we are working on two shipments. The delegates are as follows : ~ West Coast (Joshie225) ~ East Coast (Dart270) There has been interest in other products, so far here is a list of prices for consideration. ~ Hurricane Intake Manifold (2 or 4-Barrel) : US$350 ~ SureSeal Graphite Manifold Gasket : US$15 ~ PermaSeal Head Gasket : US$30 ~ Triple Weber Intake Manifold : US$305 These prices are the 'landed' US costs for each component and does not include local shipping for your East or West coast delegate to your door. Time is running out, please help me to get this sorted out asap. Thanks folks, I look forward to getting this deal moving. kind regards, Ray Pentastar Parts & Restorations |
|
| Page 3 of 7 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|